{"title":"Battery Tender","description":null,"products":[{"product_id":"battery-tender®-ring-harness-for-lithium-batteries-1","title":"Battery Tender® Ring Harness for Lithium Batteries","description":"\u003cp\u003eThe Battery Tender® Ring Harness for Lithium Batteries is the permanent battery connection harness designed specifically for Lithium (LiFePO4) battery applications — providing the SAE quick disconnect interface for Battery Tender® Multi-Chemistry chargers while meeting the connection requirements of lithium battery management systems.\u003c\/p\u003e\u003ch3\u003eDesigned for Lithium Chemistry\u003c\/h3\u003e\u003cp\u003eStandard ring terminal harnesses are designed for lead-acid battery connections. Lithium batteries — particularly those with integrated battery management systems (BMS) — have specific connection requirements that the Ring Harness for Lithium Batteries addresses. Use this harness when connecting Battery Tender® Multi-Chemistry chargers to Lithium batteries for permanent installation maintenance charging.\u003c\/p\u003e\u003ch3\u003eSAE Quick Disconnect — Full Battery Tender® Multi-Chemistry Compatibility\u003c\/h3\u003e\u003cp\u003eThe SAE J563 quick disconnect connector provides the standard interface for Battery Tender® Multi-Chemistry chargers. Connect the harness to the lithium battery terminals, set the charger to Lithium mode, and ISM delivers the correct Lithium charging profile through the permanent harness connection.\u003c\/p\u003e\u003ch3\u003eCompatible Chargers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBattery Tender® Junior Multi-Chemistry 12V 1 Amp\u003c\/li\u003e\n\u003cli\u003eBattery Tender® Plus 6V\/12V 2 Amp\u003c\/li\u003e\n\u003cli\u003ePowerTender® Multi-Chemistry models\u003c\/li\u003e\n\u003cli\u003eAny Battery Tender® charger with Lithium (LiFePO4) Multi-Chemistry support and SAE quick disconnect output\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMotorcycles and powersports vehicles with factory or aftermarket Lithium battery upgrades\u003c\/li\u003e\n\u003cli\u003eATVs and UTVs with Lithium batteries\u003c\/li\u003e\n\u003cli\u003eAny 12V Lithium battery application requiring a permanent SAE quick disconnect maintenance charging connection\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155561693382,"sku":"081-0069-17","price":7.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-ring-harness-for-lithium-batteries-081-0069-17-30740972503138.jpg?v=1788837109"},{"product_id":"weather-resistant-12v-5-amp-24v-2-5-amp-selectable-battery-charger","title":"Weather Resistant 12V @ 5 AMP \u0026 24V @ 2.5 AMP Selectable Battery Charger","description":"\u003cp\u003eDesigned for harsh environments the 5 AMP ultra tough Battery Charger \u0026amp; Maintainer is weather resistant and built to endure elements. Perfect for industrial heavy duty machinery that puts your gear to the test. This charger is versatile and designed to allow you to choose between AGM, Flooded, GEL, or Lithium (LifePO4) batteries. Switch easily between 12V @5 AMPs or 24V @2.5 AMPs. Integrated mounting capabilities give you the option to install easily on to your heavy duty vehicles and equipment.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eSTAY CHARGED\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe powerful 5 AMP charger provides a full charge to your watercraft or vehicle battery before automatically going into float mode to maintain proper voltage levels without overcharging.    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCONNECT AND FORGET\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWith a low maintenance design, our premier watercraft charger and maintainer is compact and ultra tough designed with a heavy duty cast aluminum casing.  Use an AC Power Port (P\/N 024-0004-BK) for easy routine charging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEXTENDED BATTERY LIFE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCompatible with lead-acid, flooded, lithium, and sealed maintenance free batteries (AGM and gel cell) ideal for use in long term storage to provide and maintain an optimal charge.    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWEATHER RESISTANT AND DURABLE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHeavy duty cast aluminum casing and reinforced seals provide weather resistant charging perfect for marine or rugged conditions\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia Residents Warning\u003c\/strong\u003e: Cancer and Reproductive Harm - \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155561791686,"sku":"022-0258-DL-CA","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-weather-resistant-12v-5-amp-24v-2-5-amp-selectable-battery-charger-022-0258-dl-wh-59541317386609_81e217dd-c410-46fc-9c95-a5134d399433.png?v=1788837112"},{"product_id":"battery-tender®-12v-35-watt-mountable-solar-battery-charger","title":"35 Watt Mountable Solar 12V Battery Charger with Solar Controller","description":"\u003cp\u003eNo access to power? No problem with this 35-Watt Solar Panel. With built-in Battery Tender® 3-step automatic microprocessor controller, this 100% portable battery charger and maintainer is perfect for storage spaces without power access!\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eMOUNTABLE \u0026amp; VERSATILE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEasily mount to outdoor surfaces with 4 included mounting holes.  Harness and regulate solar energy in areas without power access    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSolar panel, solar charge controller, alligator clips quick disconnect cable, ring terminal quick disconnect cable, 6 foot quick disconnection extension cable, 5 year manufacturer warranty and lifetime customer support    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMART CHARGING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePrevent overcharging and battery discharging with the controller's 3-step charging process.  LED indicator light displays current charging status    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVERSATILE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis solar panel is compatible with lithium (LifeP04), lead acid, flooded, and sealed maintenance-free AGM and gel cell batteries   \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePROTECTED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP67 rated weather resistant with spark proof and reverse charging protection; comes with a 5-year manufacturer limited warranty and lifetime customer support\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Residents WARNING\u003c\/strong\u003e: Cancer and Reproductive Harm - \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov.\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Resources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReady to install your solar panel?\u003c\/p\u003e\n\u003cp\u003e[\u003ca rel=\"noopener\" title=\"Mounting Template for 35 Watt Solar Panel\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/35Watt_Solar_Panel_Dimensions_Mounting_Template.pdf?v=1752070998\" target=\"_blank\"\u003eHere's a printable solar panel mounting template for easy installation\u003c\/a\u003e]\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155561857222,"sku":"021-1174","price":179.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-35-watt-mountable-solar-12v-battery-charger-with-solar-controller-021-1174-30744406655074.jpg?v=1788837112"},{"product_id":"battery-tender®-12v-17-watt-mountable-solar-battery-charger","title":"17 Watt Mountable Solar 12V Battery Charger with Solar Controller","description":"\u003cp\u003eCharge and maintain your vehicle's battery with the sun. Once connected, this Battery Tender® Battery Charger will charge and maintain your battery so it's always ready to go when you are. \u003c\/p\u003e\n\u003cp\u003eLightweight, fully-automatic, and easy to use, the Battery Tender® Solar Panels are the only panels available with a built-in charge controller to prevent overcharging.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eMOUNTABLE \u0026amp; VERSATILE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEasily mount to outdoor surfaces with 4 included mounting holes.  Harness and regulate solar energy in areas without power access    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMART CHARGING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePrevent overcharging and battery discharging with the controller's 3-step charging process.  LED indicator light displays current charging status    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVERSATILE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis compact solar panel is compatible with lithium (LifeP04), lead acid, flooded, and sealed maintenance-free AGM and gel cell batteries    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePROTECTED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP67 rated weather resistant with spark proof and reverse charging protection; comes with a 5-year manufacturer limited warranty and lifetime customer support\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Residents WARNING\u003c\/strong\u003e: Cancer and Reproductive Harm - \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov.\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Resources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReady to install your solar panel?\u003c\/p\u003e\n\u003cp\u003e[\u003ca rel=\"noopener\" title=\"Mounting Template for 17 Watt Solar Panel\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/1155\/9778\/files\/17Watt_Solar_Panel_Dimesions_Mounting_Template.pdf?v=1752070974\" target=\"_blank\"\u003eHere's a printable solar panel mounting template for easy installation\u003c\/a\u003e]\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155561955526,"sku":"021-1173","price":134.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-17-watt-mountable-solar-12v-battery-charger-with-solar-controller-021-1173-30744404983906.jpg?v=1788837114"},{"product_id":"replacement-hose-for-800-amp-jump-starter-and-tire-inflator","title":"Replacement Hose for 800 AMP Jump Starter and Tire Inflator","description":"\u003cp\u003eGenuine replacement air hose for the Battery Tender® 800 AMP Jump Starter and Tire Inflator (SKU 030-3010-WH). Restores full inflation performance if your original hose is lost or damaged, threading directly onto the built-in inflator with an airtight seal.\u003c\/p\u003e\u003cp\u003eAn exact-fit Battery Tender® service part, backed by Battery Tender® lifetime customer support.\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155562021062,"sku":"081-0069-30","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/081-0069-30.BatteryTender.01.Front_33675d47-039d-4268-aee5-a5859dd59efc.png?v=1788837116"},{"product_id":"weather-resistant-1-amp-12v-battery-charger","title":"Weather Resistant 1 AMP, 12V Battery Charger - Available at Menards","description":"\u003cp\u003eThe rugged Battery Tender® 12V, 1 AMP weather resistant battery charger and maintainer has all the features of our best selling Battery Tender® Junior, in a mountable water resistant package. This 1 AMP battery charger is also shock and vibration resistant, perfect for all types of ATVs, personal watercraft, motorcycles, boats, or other recreational vehicles that may be exposed to the elements.\u003c\/p\u003e\n\u003cp\u003eWhile compact in size, it's tough enough to keep your ride ready for its next adventure. The Battery Tender® 12V, 1 AMP weather resistant battery charger is designed for all lead-acid, lithium (LifePO4), and flooded or sealed maintenance free batteries (AGM and gel cell).\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSTAY CHARGED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis 1 AMP charger provides a full charge to your watercraft or vehicle battery before automatically going into float mode to maintain proper voltage levels without overcharging.    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCONNECT AND FORGET\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith a low maintenance design, our universal vehicle charger and maintainer is compact, lightweight, and easy to operate even in small storage space for your convenience.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEXTENDED BATTERY LIFE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with lead-acid, flooded, lithium (LifePO4), and sealed maintenance free batteries (AGM and gel cell) ideal for use in long term storage to provide and maintain an optimal charge.    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHER RESISTANT AND DURABLE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith all the features of our best-selling Battery Tender® Junior, in a mountable water resistant package, this charger is perfect for marine or outdoor environments\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Residents Warning\u003c\/strong\u003e: Cancer and Reproductive Harm - \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155562119366,"sku":"022-0151-DL-WH","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/BT022-01511Afrontview.jpg?v=1788837117"},{"product_id":"battery-tender®-1000-amp-jump-starter-8000mah-power-bank","title":"1000 AMP Jump Starter - 8000mAh Power Bank","description":"\u003cp\u003e\u003cfont size=\"2\"\u003eNever feel unprepared again with this lightweight and compact lithium powered Battery Tender® 1000 AMP Jump Starter and Power Bank. Fits in your glove compartment or under your seat, yet strong enough to start any 12 volt battery on gas and diesel engines up to a V8. This product is safe and easy to use with cars, boats, SUVs, trucks, and more.\u003c\/font\u003e\u003c\/p\u003e\u003cp\u003e\u003cfont size=\"2\"\u003eGone are the days of asking for a jump and connecting to another battery with cumbersome jumper cables. Simply connect each alligator clip to the corresponding terminal on your vehicle’s battery and start up the engine. Spark proof and reverse polarity protection gives you peace of mind and ensures you’re connecting to the correct terminal before the jump starter kicks in.\u003c\/font\u003e\u003c\/p\u003e\u003cp\u003e\u003cfont size=\"2\"\u003eWith the power to perform up to 30 jump starts on a single charge, the Battery Tender® 1000 AMP Portable Jump Starter and Power Bank is a great gift for any driver.\u003c\/font\u003e\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cfont size=\"2\"\u003e\u003cstrong\u003eJUMP START \u0026amp; CHARGE\u003c\/strong\u003e\u003c\/font\u003e\u003c\/p\u003e\u003cp\u003e\u003cfont size=\"2\"\u003ePeak current of 1000 AMPs provides up to 30 jump starts on a single charge; fast-charge your electronic devices.\u003c\/font\u003e\u003c\/p\u003e\u003cp\u003e\u003cfont size=\"2\"\u003e\u003cstrong\u003eINCLUDES\u003c\/strong\u003e\u003c\/font\u003e\u003c\/p\u003e\u003cp\u003e\u003cfont size=\"2\"\u003e1000 AMP jump starter, smart alligator clips, micro USB charging cable, convenient storage bag, 1 year warranty and lifetime customer support.    \u003c\/font\u003e\u003c\/p\u003e\u003cp\u003e\u003cfont size=\"2\"\u003e\u003cstrong\u003eVERSATILE\u003c\/strong\u003e\u003c\/font\u003e\u003c\/p\u003e\u003cp\u003e\u003cfont size=\"2\"\u003eDesigned for 12 volt batteries in gas and diesel engines up to a V8 - ideal for cars, SUVs, trucks, boats, and more; able to charge via USB, type C, AC, and DC devices on the go.\u003c\/font\u003e\u003c\/p\u003e\u003cp\u003e\u003cfont size=\"2\"\u003e\u003cstrong\u003eSAFE\u003c\/strong\u003e\u003c\/font\u003e\u003c\/p\u003e\u003cp\u003e\u003cfont size=\"2\"\u003eSpark-proof and reverse polarity protection ensures no charge is sent unless the alligator clips are connected correctly to the battery.\u003c\/font\u003e\u003c\/p\u003e\u003cp\u003e\u003cfont size=\"2\"\u003e\u003cstrong\u003eUTILITY\u003c\/strong\u003e\u003c\/font\u003e\u003c\/p\u003e\u003cp\u003e\u003cfont size=\"2\"\u003ePerfect companion during roadside emergencies.  Ultra bright LED flashlight and emergency strobe for enhanced visibility.\u003c\/font\u003e\u003c\/p\u003e\u003cp\u003e\u003cfont size=\"2\"\u003e\u003cstrong\u003eCalifornia Residents Warning\u003c\/strong\u003e: Cancer and Reproductive Harm - \u003c\/font\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003e\u003cfont size=\"2\"\u003eP65Warnings.ca.gov\u003c\/font\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155562184902,"sku":"030-1011-WH","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-1000-amp-jump-starter-8000mah-power-bank-030-1011-wh-30744389746786.jpg?v=1788837119"},{"product_id":"battery-tender-12v-8-amp-2-amp-selectable-battery-charger-and-maintainer","title":"Power Tender® 8 Amp\/2 Amp 12V Battery Charger and Maintainer","description":"\u003cp\u003eSome batteries need to charge fast. All batteries need to be maintained. The Power Tender® 8 Amp\/2 Amp IP65 delivers both in one unit — 8 Amp high-output charging for rapid battery recovery, 2 Amp maintenance mode for long-term storage, IP65 weather resistance for permanent installation in any environment, and full Multi-Chemistry support for both lead-acid and Lithium batteries. The most capable mid-range charger in the Battery Tender® lineup.\u003c\/p\u003e\n\u003ch3\u003eDual Output: 8 Amp Charging, 2 Amp Maintenance\u003c\/h3\u003e\n\u003cp\u003eThe Power Tender® 8 Amp\/2 Amp uses a dual-output architecture: 8 Amp for high-speed bulk charging of depleted batteries, and 2 Amp for ongoing maintenance of fully charged batteries. At 8 Amp, a depleted 60Ah automotive battery recovers in approximately 7–8 hours. Once charging is complete, ISM (Infinite Sequential Monitoring™) transitions to 2 Amp maintenance mode automatically, holding the battery at peak voltage without overcharging for as long as the charger remains connected.\u003c\/p\u003e\n\u003ch3\u003eMulti-Chemistry: Lead-Acid and Lithium\u003c\/h3\u003e\n\u003cp\u003eA manual chemistry selector switches between lead-acid and Lithium (LiFePO4) charging profiles, delivering the correct absorption voltage and float protocol for each battery type. Modern vehicles and powersports equipment increasingly use Lithium as factory-standard or aftermarket batteries — the Power Tender® 8 Amp\/2 Amp supports both chemistries correctly at full 8 Amp output.\u003c\/p\u003e\n\u003ch3\u003eISM: 4-Stage Charging at 8 Amp or 2 Amp\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization\u003c\/strong\u003e — Battery health check and chemistry confirmation before current flows\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Charge\u003c\/strong\u003e — Full 8 Amp output restores depleted capacity rapidly at the correct voltage for the selected chemistry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorption\u003c\/strong\u003e — Current tapers automatically as the battery approaches full charge, preventing overcharge at either chemistry setting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Maintenance\u003c\/strong\u003e — 2 Amp maintenance current with the correct protocol for lead-acid or Lithium, delivered 24\/7, indefinitely, without overcharging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompatible battery size range: 20Ah to 150Ah at 12V. Lead-acid: flooded, AGM, gel cell, and sealed maintenance-free. Lithium: LiFePO4.\u003c\/p\u003e\n\u003ch3\u003eIP65 Weather Resistance — Permanent Installation Ready\u003c\/h3\u003e\n\u003cp\u003eIP65 certification provides complete dust protection and water jet resistance. The Power Tender® 8 Amp\/2 Amp can be permanently mounted in outdoor locations, engine compartments, and semi-exposed storage environments where standard indoor chargers cannot operate.\u003c\/p\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePassenger cars and light trucks requiring fast recovery charging\u003c\/li\u003e\n\u003cli\u003eMotorcycles and powersports vehicles with lead-acid or Lithium batteries\u003c\/li\u003e\n\u003cli\u003eBoats and marine vessels\u003c\/li\u003e\n\u003cli\u003eATVs, UTVs, and side-by-sides with large or Lithium batteries\u003c\/li\u003e\n\u003cli\u003eRVs and campers requiring faster charge cycles\u003c\/li\u003e\n\u003cli\u003eFleet vehicles needing rapid turnaround between storage periods\u003c\/li\u003e\n\u003cli\u003eAny 12V lead-acid or Lithium battery from 20Ah to 150Ah\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAutomatic Temperature Compensation\u003c\/h3\u003e\n\u003cp\u003eCharge voltage adjusts automatically based on ambient temperature for lead-acid applications — increasing in cold conditions to ensure complete charging, reducing in heat to prevent overcharging. Critical for IP65 outdoor-mounted installations where temperatures vary significantly.\u003c\/p\u003e\n\u003ch3\u003eSafety Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpark-proof connection\u003c\/strong\u003e — No current flows until polarity and connection are confirmed correct\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverse polarity protection\u003c\/strong\u003e — Protects Lithium BMS systems and vehicle electronics\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eETL and CETL certified\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Power Tender® 8 Amp\/2 Amp IP65 (022-1005) is the current replacement for the legacy 022-0337 unit — upgraded with IP65 weather resistance and Lithium Multi-Chemistry support.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155562250438,"sku":"022-1005-DL-WH","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/022-1005-DL-WH.BatteryTender.01.png?v=1788837121"},{"product_id":"10amp-batterycharger","title":"Power Tender® 10 Amp Multi-Chemistry 12V Battery Charger and Maintainer","description":"\u003cp\u003eThe highest-output charger in the standard Battery Tender® lineup with full Multi-Chemistry support for both lead-acid and Lithium batteries. The Power Tender® 10 Amp Multi-Chemistry IP67 delivers 10 Amp charging for large battery banks, deep-cycle marine batteries, and heavy-duty automotive applications — with IP67 full immersion waterproofing and ISM (Infinite Sequential Monitoring™) precision that transitions from rapid charging to indefinite float maintenance automatically.\u003c\/p\u003e\n\u003ch3\u003e10 Amp Output — For Large Batteries and Fast Recovery\u003c\/h3\u003e\n\u003cp\u003eAt 10 Amp, a depleted 100Ah battery recovers in approximately 10 hours — practical for the large AGM batteries in trucks, SUVs, marine vessels, and RVs that take days to recover at lower outputs. For deep-cycle battery banks used in house power applications, 10 Amp bulk charging is the threshold where recovery speed becomes operationally significant. ISM manages the taper from 10 Amp bulk to absorption automatically as the battery approaches full charge.\u003c\/p\u003e\n\u003ch3\u003eMulti-Chemistry: Lead-Acid and Lithium at 10 Amp\u003c\/h3\u003e\n\u003cp\u003eA manual chemistry selector delivers the correct charging profile for either Lithium (LiFePO4) or lead-acid batteries — including the higher absorption voltages that Lithium requires and the correct float protocol that prevents overcharging in both chemistries. At 10 Amp output with full Lithium support, the Power Tender® 10 Amp Multi-Chemistry is suited for high-capacity Lithium battery systems in marine, RV, and commercial vehicle applications.\u003c\/p\u003e\n\u003ch3\u003eISM: 4-Stage Charging at 10 Amp\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization\u003c\/strong\u003e — Battery health check and chemistry confirmation before current flows\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Charge\u003c\/strong\u003e — Full 10 Amp output restores depleted capacity rapidly at the correct voltage for the selected chemistry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorption\u003c\/strong\u003e — Current tapers automatically as the battery approaches full charge, preventing overcharge damage in both lead-acid and Lithium applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Maintenance\u003c\/strong\u003e — Correct maintenance protocol for lead-acid or Lithium delivered 24\/7, indefinitely, without overcharging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompatible battery size range: 40Ah to 200Ah at 12V. Lead-acid: flooded, AGM, gel cell, and sealed maintenance-free. Lithium: LiFePO4.\u003c\/p\u003e\n\u003ch3\u003eIP67: Full Immersion Waterproofing\u003c\/h3\u003e\n\u003cp\u003eIP67 certification provides complete dust protection and water immersion resistance to 1 meter for 30 minutes. The Power Tender® 10 Amp Multi-Chemistry is suitable for permanent installation in bilge-adjacent compartments, outdoor industrial enclosures, marine engine rooms, and any environment where IP65 splash resistance is insufficient.\u003c\/p\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-size trucks and SUVs with large AGM or Lithium batteries\u003c\/li\u003e\n\u003cli\u003eMarine vessels with 12V lead-acid or Lithium house battery banks\u003c\/li\u003e\n\u003cli\u003eRVs and campers with large deep-cycle or Lithium battery systems\u003c\/li\u003e\n\u003cli\u003eCommercial vehicles with high-capacity 12V batteries\u003c\/li\u003e\n\u003cli\u003eVehicles with Lithium battery upgrades in the 40Ah to 200Ah range\u003c\/li\u003e\n\u003cli\u003eAgricultural and industrial equipment with large 12V batteries\u003c\/li\u003e\n\u003cli\u003eAny application requiring IP67 protection with full Lithium compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAutomatic Temperature Compensation\u003c\/h3\u003e\n\u003cp\u003eCharge voltage adjusts automatically based on ambient temperature for lead-acid applications — increasing in cold to ensure complete charging, reducing in heat to prevent overcharging. Essential for outdoor and marine installations where temperature variation is significant.\u003c\/p\u003e\n\u003ch3\u003eSafety Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpark-proof connection\u003c\/strong\u003e — No current flows until polarity and connection are confirmed correct\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverse polarity protection\u003c\/strong\u003e — Protects Lithium BMS systems and vehicle electronics from incorrect connections\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eETL and CETL certified\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Power Tender® 10 Amp Multi-Chemistry IP67 (022-1006) is the current replacement for the legacy 022-0229 unit — upgraded with full Lithium Multi-Chemistry support and IP67 waterproofing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155562381510,"sku":"022-1006-DL-WH","price":124.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/022-1006-DL-WH.BatteryTender.01.jpg?v=1788837121"},{"product_id":"powerplus-and-wavecharge-pro-ring-terminal-cable","title":"Battery Tender® PowerPlus and WaveCharge Pro Ring Terminal Cable","description":"\u003cp\u003eThe Battery Tender® PowerPlus and WaveCharge Pro Ring Terminal Cable is the heavy-duty permanent battery connection harness engineered for the higher-output PowerPlus and WaveCharge Pro charger lines. Built with 10-gauge wire to handle the higher current output of these chargers, it mounts permanently to the battery terminals and provides the SAE quick disconnect interface for fast charger connection without direct terminal access.\u003c\/p\u003e\u003ch3\u003e10-Gauge Wire — Built for Higher Current\u003c\/h3\u003e\u003cp\u003eStandard ring terminal harnesses use lighter gauge wire suited for the Plus and Junior charger lines. The PowerPlus and WaveCharge Pro lines deliver significantly higher output — up to 26 Amps for the PowerPlus 12V and up to 10 Amps per bank for the WaveCharge Pro. The 10-gauge conductor in this harness is rated for the higher current demands of these chargers, ensuring a safe, low-resistance permanent connection.\u003c\/p\u003e\u003ch3\u003eScrew-Terminal Connection — Secure Mechanical Attachment\u003c\/h3\u003e\u003cp\u003eThe ring terminal ends screw directly to the battery terminals using the battery's terminal hardware — providing a mechanically secure connection that resists vibration and does not depend on clamping force alone.\u003c\/p\u003e\u003ch3\u003eCompatible Chargers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBattery Tender® PowerPlus 12V 26 Amp\u003c\/li\u003e\n\u003cli\u003eBattery Tender® PowerPlus 24V 20 Amp\u003c\/li\u003e\n\u003cli\u003eBattery Tender® PowerPlus 36V 18 Amp\u003c\/li\u003e\n\u003cli\u003eBattery Tender® PowerPlus 48V 15 Amp\u003c\/li\u003e\n\u003cli\u003eWaveCharge Pro 2-Bank 12V 20 Amp\u003c\/li\u003e\n\u003cli\u003eWaveCharge Pro 3-Bank 12V 30 Amp\u003c\/li\u003e\n\u003cli\u003eWaveCharge Pro 4-Bank 12V 40 Amp\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNot Recommended For\u003c\/h3\u003e\u003cp\u003eStandard Plus and Junior family chargers — the lighter-gauge Ring Terminal Harness (081-0069-6) is appropriate for those applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155562479814,"sku":"081-0210","price":22.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/081-0210_white_background_20250529.png?v=1788837123"},{"product_id":"charge-n-start-4120-4-amp-battery-charger-1200-amp-jump-starter","title":"Charge N Start 4120 — 4 Amp Battery Charger \u0026 1200 Amp Jump Starter","description":"\u003cp\u003eThe most capable unit in the Charge N Start lineup. The Battery Tender® Charge N Start 4120 combines a 4 Amp ISM smart battery charger with 1200 Amps of portable lithium jump starting power — four times the charging output of the CNS 1100 and 1120, same 1200 Amp jump starting power as the CNS 1120. Faster battery recovery for larger vehicles. Maximum jump starting power. The complete battery charger and jump starter solution in one portable unit.\u003c\/p\u003e\u003ch3\u003eTwo Devices. Maximum Output. One Unit.\u003c\/h3\u003e\u003cp\u003eAs a \u003cstrong\u003e4 Amp ISM smart battery charger and maintainer\u003c\/strong\u003e, it recovers and maintains larger automotive batteries significantly faster than 1 Amp alternatives. As a \u003cstrong\u003e1200 Amp portable lithium jump starter\u003c\/strong\u003e, it starts full-size vehicles with gas engines up to 6.0L and diesel engines up to 4.0L without jumper cables or a second vehicle.\u003c\/p\u003e\u003ch3\u003eHow to Jump Start a Car — 1200 Amps Without Jumper Cables\u003c\/h3\u003e\u003cp\u003eJump starting a dead car battery with the CNS 4120:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConnect the red jump start clamp to the positive (+) terminal on the dead battery\u003c\/li\u003e\n\u003cli\u003eConnect the black jump start clamp to a ground point or the negative (−) terminal\u003c\/li\u003e\n\u003cli\u003eSpark-proof technology confirms connection — reverse polarity protection prevents damage from incorrect connections\u003c\/li\u003e\n\u003cli\u003eCrank for up to 5 seconds per attempt with 30 seconds between attempts\u003c\/li\u003e\n\u003cli\u003eOnce running, disconnect and store\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eNo second vehicle. No cable management. 1200 Amps handles the full range of passenger cars, trucks, and SUVs with gas engines up to 6.0L and diesel engines up to 4.0L.\u003c\/p\u003e\u003ch3\u003eHow to Jump Start a Motorcycle, ATV, or Powersports Vehicle\u003c\/h3\u003e\u003cp\u003eThe CNS 4120's 1200 Amp lithium jump pack is among the most powerful portable motorcycle and powersports jump starters available — more than sufficient for any 12V powersports battery:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eAccess the battery — remove the seat or open the battery compartment\u003c\/li\u003e\n\u003cli\u003eConnect the red jump start clamp to the positive (+) terminal\u003c\/li\u003e\n\u003cli\u003eConnect the black clamp to a clean frame ground point or the negative (−) terminal\u003c\/li\u003e\n\u003cli\u003eCrank for no more than 3–5 seconds — small powersports batteries respond immediately to lithium jump pack power\u003c\/li\u003e\n\u003cli\u003eOnce running, disconnect and secure the compartment\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eThe CNS 4120's 4 Amp ISM charger is particularly well-suited for powersports applications where the battery is used infrequently and benefits from faster recovery after seasonal storage. Motorcycles, ATVs, UTVs, side-by-sides, personal watercraft, and snowmobiles stored for weeks or months are among the highest-risk dead battery scenarios — ISM maintenance charging at 4 Amps keeps them at full capacity and reduces the need for the jump start function over time.\u003c\/p\u003e\u003ch3\u003eHow to Jump Start a Truck or Large SUV\u003c\/h3\u003e\u003cp\u003eFor full-size trucks, diesel pickups, and large SUVs with high-capacity batteries, the 4 Amp charger recovers depleted batteries more than three times faster than 1 Amp alternatives, and 1200 Amps provides ample cranking power for cold starts and marginally charged batteries:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eLocate the battery — typically under the hood, occasionally in the truck bed or under the seat\u003c\/li\u003e\n\u003cli\u003eConnect red clamp to positive (+), black clamp to ground or negative (−)\u003c\/li\u003e\n\u003cli\u003eSpark-proof confirmation before current flows\u003c\/li\u003e\n\u003cli\u003eCrank for up to 5 seconds with 30-second intervals between attempts\u003c\/li\u003e\n\u003cli\u003eDisconnect once running\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eCNS 4120 vs CNS 1120 — Why 4 Amp Charging Matters\u003c\/h3\u003e\u003cp\u003eBoth units deliver 1200 Amps of jump starting power. The CNS 4120's 4 Amp charger recovers large automotive batteries more than three times faster during bulk charge — meaningful for trucks, SUVs, RVs, and boats where 1 Amp recovery takes significantly longer.\u003c\/p\u003e\u003ch3\u003eTwo Separate Clamp Sets — Not Interchangeable\u003c\/h3\u003e\u003cp\u003eDedicated charging clamps for ISM maintenance. Dedicated jump start clamps for 1200 Amp cranking. Not interchangeable — engineered for their specific functions.\u003c\/p\u003e\u003ch3\u003eInternal Lithium Jump Pack — Auto-Switch Keeps It Ready\u003c\/h3\u003e\u003cp\u003eThe Charge N Start 4120 automatically switches between charging the external vehicle battery and topping up the internal jump pack when it detects the internal level has dropped — ensuring 1200 Amps of jump starting power is always available when needed.\u003c\/p\u003e\u003ch3\u003eThe Prevention and the Cure — At Full Output\u003c\/h3\u003e\u003cp\u003e4 Amp ISM prevents sulfation across all battery sizes. 1200 Amp jump pack handles unexpected failures. One unit, both outcomes, maximum output.\u003c\/p\u003e\u003ch3\u003eMulti-Chemistry Charging: Lead-Acid and Lithium\u003c\/h3\u003e\u003cp\u003eThe 4 Amp smart charger supports both lead-acid and Lithium (LiFePO4) battery chemistries with a manual selector delivering the correct ISM charging profile for each type. Compatible battery size range: 14Ah to 100Ah at 12V. Lead-acid: flooded, AGM, gel cell, sealed MF. Lithium: LiFePO4.\u003c\/p\u003e\u003ch3\u003eISM: 4-Stage Smart Charging at 4 Amps\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization\u003c\/strong\u003e — Battery health check and polarity confirmation before charging begins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Charge\u003c\/strong\u003e — Full 4 Amp output restores depleted capacity efficiently\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorption\u003c\/strong\u003e — Current tapers automatically as the battery approaches full charge, preventing overcharge damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Maintenance\u003c\/strong\u003e — Correct maintenance protocol for the selected chemistry delivered 24\/7, indefinitely\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Vehicles\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePassenger cars and trucks up to 6.0L gas \/ 4.0L diesel\u003c\/li\u003e\n\u003cli\u003eMotorcycles and touring bikes\u003c\/li\u003e\n\u003cli\u003eATVs, UTVs, and off-road vehicles\u003c\/li\u003e\n\u003cli\u003eBoats and marine vessels\u003c\/li\u003e\n\u003cli\u003eRVs and campers\u003c\/li\u003e\n\u003cli\u003eAny 12V lead-acid or Lithium battery from 14Ah to 100Ah\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy Lithium Outperforms Lead-Acid Jump Boxes\u003c\/h3\u003e\u003cp\u003eConsistent peak Amps in cold weather when lead-acid units lose capacity most. Months of charge retention in storage. Fraction of the weight of lead-acid units. Stays ready through continuous wall-connected maintenance charging without degradation.\u003c\/p\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpark-proof connection on both clamp sets\u003c\/strong\u003e — no current flows until connection is confirmed correct\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReverse polarity protection on both clamp sets\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOvercurrent protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eETL and CETL certified\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155562578118,"sku":"030-7020-WH","price":179.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/030-7020-WH_wClips.jpg?v=1788837125"},{"product_id":"charge-n-start-1120-1-amp-battery-charger-1200-amp-jump-starter","title":"Charge N Start 1120 — 1 Amp Battery Charger \u0026 1200 Amp Jump Starter","description":"\u003cp\u003eThe Battery Tender® Charge N Start 1120 is the smart battery charger, maintainer, and portable jump starter that prevents the dead battery and handles it when prevention wasn't enough — with 1200 Amps of lithium jump starting power for gas engines up to 6.0L and diesel engines up to 4.0L. More jump starting power than the CNS 1100, same 1 Amp ISM smart charging, and the same auto-switching internal lithium pack that stays fully charged and always ready.\u003c\/p\u003e\u003ch3\u003eTwo Devices. One Unit. Complete Battery Coverage.\u003c\/h3\u003e\u003cp\u003eAs a \u003cstrong\u003e1 Amp ISM smart battery charger and maintainer\u003c\/strong\u003e, it keeps the vehicle battery at 100% through Battery Tender® ISM technology. As a \u003cstrong\u003e1200 Amp portable lithium jump starter\u003c\/strong\u003e, the internal pack delivers full-size vehicle starting power for gas engines up to 6.0L and diesel engines up to 4.0L — without jumper cables or a second vehicle.\u003c\/p\u003e\u003ch3\u003eHow to Jump Start a Car Without Jumper Cables\u003c\/h3\u003e\u003cp\u003eJump starting a dead car battery takes under two minutes:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConnect the red jump start clamp to the positive (+) terminal on the dead battery\u003c\/li\u003e\n\u003cli\u003eConnect the black jump start clamp to a ground point or the negative (−) terminal\u003c\/li\u003e\n\u003cli\u003eSpark-proof system confirms connection before any current flows\u003c\/li\u003e\n\u003cli\u003eCrank for up to 5 seconds — most vehicles start within 1–3 attempts\u003c\/li\u003e\n\u003cli\u003eDisconnect clamps and store\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eNo second vehicle. No jumper cable sequence. 1200 Amps handles full-size trucks and SUVs with gas engines up to 6.0L and diesel engines up to 4.0L.\u003c\/p\u003e\u003ch3\u003eHow to Jump Start a Motorcycle, ATV, or Powersports Vehicle\u003c\/h3\u003e\u003cp\u003eAt 1200 peak Amps, the CNS 1120 is a significantly overpowered motorcycle jump starter — more than enough to start any powersports battery quickly and safely:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eAccess the battery — remove the seat or open the battery compartment as needed\u003c\/li\u003e\n\u003cli\u003eConnect the red jump start clamp to the positive (+) terminal\u003c\/li\u003e\n\u003cli\u003eConnect the black clamp to a clean ground point on the frame or the negative (−) terminal\u003c\/li\u003e\n\u003cli\u003eCrank for no more than 3–5 seconds — powersports batteries are small and recover from a lithium jump pack quickly\u003c\/li\u003e\n\u003cli\u003eOnce running, disconnect and secure the battery compartment\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eATVs, UTVs, side-by-sides, dirt bikes, and personal watercraft with 12V batteries are all compatible with the CNS 1120 jump start function. These vehicles are among the most common seasonal storage scenarios where ISM maintenance charging provides the highest value — keeping the battery at full charge through months of inactivity so the jump start function is rarely needed.\u003c\/p\u003e\u003ch3\u003eCNS 1120 vs CNS 1100 — Why 1200 Amps\u003c\/h3\u003e\u003cp\u003eBoth units share the 1 Amp ISM smart charger. The CNS 1120 steps up to 1200 Amps — providing additional cranking capacity for full-size trucks, SUVs, larger engines, and cold-weather starts where extra peak Amps make the difference.\u003c\/p\u003e\u003ch3\u003eTwo Separate Clamp Sets — Not Interchangeable\u003c\/h3\u003e\u003cp\u003eDedicated charging clamps for ISM maintenance. Dedicated jump start clamps for 1200 Amp cranking. Not interchangeable — engineered for their specific functions.\u003c\/p\u003e\u003ch3\u003eInternal Lithium Jump Pack — Auto-Switch Keeps It Ready\u003c\/h3\u003e\u003cp\u003eThe Charge N Start 1120 automatically switches between charging the external vehicle battery and topping up the internal jump pack when it detects the internal level has dropped — ensuring 1200 Amps of jump starting power is always available when needed. Both functions stay operational without separate charging sessions or devices.\u003c\/p\u003e\u003ch3\u003eThe Prevention and the Cure\u003c\/h3\u003e\u003cp\u003eISM prevents sulfation — the permanent, irreversible cause of most dead batteries in stored vehicles. When unexpected failures occur, 1200 Amps handles the start. One unit covers both outcomes.\u003c\/p\u003e\u003ch3\u003eMulti-Chemistry Charging: Lead-Acid and Lithium\u003c\/h3\u003e\u003cp\u003eThe 1 Amp smart charger supports both lead-acid and Lithium (LiFePO4) battery chemistries with a manual selector delivering the correct ISM charging profile for each type. Compatible battery size range: 14Ah to 80Ah at 12V. Lead-acid: flooded, AGM, gel cell, sealed MF. Lithium: LiFePO4.\u003c\/p\u003e\u003ch3\u003eISM: 4-Stage Smart Charging\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization\u003c\/strong\u003e — Battery health check before charging begins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Charge\u003c\/strong\u003e — Full 1 Amp output restores depleted capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorption\u003c\/strong\u003e — Current tapers automatically as the battery approaches full charge, preventing overcharge damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Maintenance\u003c\/strong\u003e — Micro-current delivered 24\/7 maintains peak voltage indefinitely without overcharging\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Vehicles\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePassenger cars and trucks up to 6.0L gas \/ 4.0L diesel\u003c\/li\u003e\n\u003cli\u003eMotorcycles and touring bikes\u003c\/li\u003e\n\u003cli\u003eATVs, UTVs, and powersports vehicles\u003c\/li\u003e\n\u003cli\u003eBoats and personal watercraft\u003c\/li\u003e\n\u003cli\u003eRVs and campers\u003c\/li\u003e\n\u003cli\u003eAny 12V lead-acid or Lithium battery from 14Ah to 80Ah\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy Lithium Jump Starters Outperform Lead-Acid Jump Boxes\u003c\/h3\u003e\u003cp\u003eLithium delivers consistent peak Amp output in cold weather when lead-acid units lose capacity most, holds charge for months in storage, and weighs significantly less than equivalent lead-acid jump boxes — staying ready through extended wall-connected maintenance charging without degradation.\u003c\/p\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpark-proof connection on both clamp sets\u003c\/strong\u003e — no current flows until connection is confirmed correct\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReverse polarity protection on both clamp sets\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOvercurrent protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eETL and CETL certified\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155562676422,"sku":"030-7012-WH","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/030-7012-WH_wClips.jpg?v=1788837127"},{"product_id":"charge-n-start-1100-1-amp-battery-charger-1000-amp-jump-starter","title":"Charge N Start 1100 — 1 Amp Battery Charger \u0026 1000 Amp Jump Starter","description":"\u003cp\u003eThe Battery Tender® Charge N Start 1100 is the only product that prevents a dead battery and jump starts one when prevention wasn't enough. A 1 Amp ISM (Infinite Sequential Monitoring™) smart battery charger and maintainer combined with a 1000 Amp portable lithium jump starter — two devices that every vehicle owner should have, built into one unit. Connect it to the wall and it keeps the battery at 100%. Carry it with you and it jump starts the engine when the battery fails anyway.\u003c\/p\u003e\u003ch3\u003eTwo Functions That Belong Together\u003c\/h3\u003e\u003cp\u003eDead batteries happen two ways: storage discharge that ISM maintenance prevents, and unexpected failures that a jump starter handles. The Charge N Start 1100 covers both. As a \u003cstrong\u003esmart battery charger and maintainer\u003c\/strong\u003e, it uses Battery Tender® ISM technology to maintain the vehicle battery at peak capacity indefinitely. As a \u003cstrong\u003e1000 Amp portable lithium jump starter\u003c\/strong\u003e, the internal battery pack delivers enough cranking power to start most passenger cars, motorcycles, ATVs, and powersports vehicles when the unexpected happens.\u003c\/p\u003e\u003ch3\u003eHow to Jump Start a Car With the Charge N Start 1100\u003c\/h3\u003e\u003cp\u003eJump starting a car without jumper cables takes under two minutes:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConnect the red jump start clamp to the positive (+) terminal on the dead battery\u003c\/li\u003e\n\u003cli\u003eConnect the black jump start clamp to a ground point or the negative (−) terminal\u003c\/li\u003e\n\u003cli\u003eSpark-proof technology confirms connection before any current flows\u003c\/li\u003e\n\u003cli\u003eStart the vehicle — crank for up to 5 seconds per attempt with 30 seconds between attempts\u003c\/li\u003e\n\u003cli\u003eDisconnect the clamps and store\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eNo second vehicle. No jumper cables. 1000 Amps starts most passenger cars and compact SUVs with gas engines up to V6 and diesel engines up to 3.0L.\u003c\/p\u003e\u003ch3\u003eHow to Jump Start a Motorcycle, ATV, or Powersports Vehicle\u003c\/h3\u003e\u003cp\u003eMotorcycles, ATVs, UTVs, and powersports vehicles have smaller batteries than cars — the CNS 1100's 1000 Amp jump pack provides far more cranking power than needed, making it one of the most capable portable motorcycle jump starters available:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eAccess the battery — on most motorcycles this means removing the seat; on ATVs and UTVs the battery is typically in a compartment under the seat or hood\u003c\/li\u003e\n\u003cli\u003eConnect the red jump start clamp to the positive (+) terminal\u003c\/li\u003e\n\u003cli\u003eConnect the black clamp to a ground point on the frame or the negative (−) terminal\u003c\/li\u003e\n\u003cli\u003eAttempt to start — crank for no more than 3–5 seconds; powersports batteries are small and recover quickly\u003c\/li\u003e\n\u003cli\u003eDisconnect and reinstall the seat or cover\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eMotorcycles and powersports vehicles are especially prone to battery discharge from extended storage, GPS systems, security alarms, and intermittent use — the exact use case ISM maintenance charging was designed to prevent.\u003c\/p\u003e\u003ch3\u003eTwo Separate Clamp Sets — Not Interchangeable\u003c\/h3\u003e\u003cp\u003eDedicated charging clamps maintain the vehicle battery through ISM. Dedicated jump start clamps deliver the cranking burst. Not interchangeable — engineered for their specific functions.\u003c\/p\u003e\u003ch3\u003eInternal Lithium Jump Pack — Always Ready\u003c\/h3\u003e\u003cp\u003ePlugging the Charge N Start 1100 into the wall maintains the connected vehicle battery through ISM charging and recharges the internal lithium jump pack simultaneously. The Charge N Start 1100 automatically switches between charging the external vehicle battery and topping up the internal jump pack when it detects the internal level has dropped — ensuring 1000 Amps of jump starting power is always available when needed.\u003c\/p\u003e\u003ch3\u003eThe Prevention and the Cure\u003c\/h3\u003e\u003cp\u003eISM maintenance prevents sulfation — the permanent, irreversible cause of most stored battery failures that require jump starting. When an unexpected failure occurs anyway, the 1000 Amp pack handles the start. One unit, both outcomes covered.\u003c\/p\u003e\u003ch3\u003eMulti-Chemistry Charging: Lead-Acid and Lithium\u003c\/h3\u003e\u003cp\u003eThe 1 Amp smart charger supports both lead-acid and Lithium (LiFePO4) battery chemistries with a manual selector delivering the correct ISM charging profile for each type. Compatible battery size range: 14Ah to 80Ah at 12V. Lead-acid: flooded, AGM, gel cell, sealed MF. Lithium: LiFePO4.\u003c\/p\u003e\u003ch3\u003eISM: 4-Stage Smart Charging\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization\u003c\/strong\u003e — Battery health check before charging begins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Charge\u003c\/strong\u003e — Full 1 Amp output restores depleted capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorption\u003c\/strong\u003e — Current tapers automatically as the battery approaches full charge, preventing overcharge damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Maintenance\u003c\/strong\u003e — Micro-current delivered 24\/7 maintains peak voltage indefinitely without overcharging\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Vehicles\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMotorcycles and touring bikes\u003c\/li\u003e\n\u003cli\u003ePassenger cars and sedans\u003c\/li\u003e\n\u003cli\u003eCompact SUVs and crossovers\u003c\/li\u003e\n\u003cli\u003eATVs, UTVs, and powersports vehicles\u003c\/li\u003e\n\u003cli\u003ePersonal watercraft\u003c\/li\u003e\n\u003cli\u003eLawnmowers and garden tractors\u003c\/li\u003e\n\u003cli\u003eAny 12V lead-acid or Lithium battery from 14Ah to 80Ah\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy Lithium Jump Starters Outperform Lead-Acid Jump Boxes\u003c\/h3\u003e\u003cp\u003eLithium jump packs hold charge for months in storage, deliver consistent peak Amps in cold weather when batteries are hardest to start, and weigh a fraction of equivalent lead-acid jump boxes — staying ready through extended wall-connected maintenance without degradation.\u003c\/p\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpark-proof connection on both clamp sets\u003c\/strong\u003e — no current flows until connection is confirmed correct\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReverse polarity protection on both clamp sets\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOvercurrent protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eETL and CETL certified\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155562807494,"sku":"030-7010-WH","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/030-7010-WH_wClips.jpg?v=1788837128"},{"product_id":"battery-tender®-junior-12v-1amp-battery-charger-available-at-walmart","title":"Junior 12V, 1AMP Battery Charger - Available at Walmart","description":"\u003cdiv\u003e\n\u003cb\u003eAvailable at Walmart \u003c\/b\u003e\u003cbr\u003eThe Battery Tender® Junior 12V, 1 AMP Battery Charger and Maintainer is all you need to stay charged, extend your vehicle's battery life. It's easy to use, safe and secure.  \u003cbr\u003eSTAY CHARGED Boost your ride’s battery life with the Battery Tender® Junior Automatic Battery Charger and Maintainer by Deltran for motorcycles, ATVs, and more! Unlike typical trickle chargers that can overcharge a battery and cause damage when connected for too long, our advanced charger and maintainer provide a full charge before switching to float mode to keep your battery at an optimal charge. Designed for use with powersports, it can even assist with automotive vehicles!\u003cbr\u003e\u003cbr\u003eEASY TO USE There’s no need to work harder when you can let our smart battery charger and maintainer do the work for you! With reversed hook-up protection and the Quick Disconnect Harness, you can connect and disconnect the charger in seconds. The lightweight charger comes with a 12-foot output cord, fused alligator clips, and a fused ring terminal harness for hard to reach spaces\u003cbr\u003e\u003cbr\u003eEXTENDED BATTERY LIFE The Battery Tender® Junior is an automatic battery charger, equipped with a Smart Microcontroller that functions as its “brain” to ensure the proper level of power is sent to the battery at all times. Coupled with its ISM adaptive charging, our charger and maintainer improves the battery life of batteries commonly used in motorcycles, ATVs, personal water-crafts, lawnmowers, and more\u003cbr\u003e\u003cbr\u003eMONITOR POWER LEVELS You can finally stop guessing if your battery is at a full charge thanks to the charger and maintainer’s LED indicator. Flashing red indicates the battery is not charging, while a solid red light lets you know that the battery is charging. When the light is flashing green, your battery is at least 80% charged and a solid green light informs you that your battery is maintaining an optimal charge\u003cbr\u003e\u003cbr\u003eSAFE AND SECURE Connect and forget with the Battery Tender® Junior! Capable of managing battery health all on its own, this charger and maintainer is equipped with reversed hook-up protection that checks for a correct connection before providing power to remain spark free.\u003c\/div\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155562905798,"sku":"022-0328","price":52.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/022-0328_1A_product_image.png?v=1788837131"},{"product_id":"hard-zipper-carry-case-for-1500-amp-and-2000-amp-jump-starters","title":"Hard Zipper Carry Case for 1500 AMP and 2000 AMP Jump Starters","description":"\u003cp\u003eProtect your Battery Tender® jump starter or charger with the convenient and durable Hard Zipper Carry Case. Designed specifically for 1500 AMP and 2000 AMP jump starters, this case is also compatible with most Battery Tender battery chargers. This premium carrying case is designed with a durable, rugged exterior to protect your jump starter from dust and moisture.  Ideal as a replacement case for lost Battery Tender jump starter cases.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eDURABLE CONSTRUCTION\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis case offers superior protection against moisture, dust, and other environmental hazards.  The rugged exterior ensures long-lasting durability, while the interior provides a snug and secure fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCONVENIENT PORTABILITY\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe built-in reinforced handle provides a comfortable and secure grip, making it easy to transport your jump starter or charger wherever you go.  The compact and lightweight design allows for easy storage in your trunk, vehicle, or garage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSECURE CLOSURE\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eA durable zipper ensures that your jump starter or charger remains securely enclosed, preventing accidental openings and damage. Custom pull tabs make for easy opening and closure, even with gloves.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVERSATILE USE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e Ideal for storing and transporting your Battery Tender® jump starter or charger in your garage, workshop, vehicle, or on the go.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDESIGNED TO FIT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e030-2020-WH and 030-2030-WH jump starters. And 021-0123, 021-0128, 022-0150, 022-0196, 022-0197, 022-0328, 022-0185G-DL-WH, 022-0186G-DL-WH, 022-0199-DL-WH, 022-0202-COS, 022-0209-BT-WH, and 022-0211-DL-WH battery chargers.\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155563004102,"sku":"Zipper-Case-1","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/Zipper-Case-1.BatteryTender.01.png?v=1788837131"},{"product_id":"hard-zipper-carry-case-for-800-amp-and-2000-amp-jump-starters","title":"Hard Zipper Carry Case for 800 AMP and 2000 AMP Jump Starters","description":"\u003cp\u003eProtect your Battery Tender® jump starter or charger with the convenient and durable Hard Zipper Carry Case. Designed specifically for 800 AMP jump starter\/tire inflator combo unit and 2000 AMP jump starter\/inverter unit, this case is also compatible with most Battery Tender battery chargers. This premium carrying case is designed with a durable, rugged exterior to protect your jump starter from dust and moisture.  Ideal as a replacement case for lost Battery Tender jump starter cases.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eDURABLE CONSTRUCTION\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis case offers superior protection against moisture, dust, and other environmental hazards.  The rugged exterior ensures long-lasting durability, while the interior provides a snug and secure fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCONVENIENT PORTABILITY\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe built-in reinforced handle provides a comfortable and secure grip, making it easy to transport your jump starter or charger wherever you go.  The compact and lightweight design allows for easy storage in your trunk, vehicle, or garage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSECURE CLOSURE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA durable zipper ensures that your jump starter or charger remains securely enclosed, preventing accidental openings and damage. Custom pull tabs make for easy opening and closure, even with gloves.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVERSATILE USE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIdeal for storing and transporting your Battery Tender® jump starter or charger in your garage, workshop, vehicle, or on the go.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDESIGNED TO FIT\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e030-3010-WH and 030-2040-WH jump starters, 021-0123, 021-0128, 022-0150, 022-0196, 022-0197, 022-0328, 022-0185G-DL-WH, 022-0186G-DL-WH, 022-0199-DL-WH, 022-0202-COS, 022-0209-BT-WH, and 022-0211-DL-WH battery chargers.\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155563167942,"sku":"Zipper-Case-2","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/Zipper-Case-2.BatteryTender.01.png?v=1788837133"},{"product_id":"accessory-cable-for-kid-trax-ride-on-toys","title":"Accessory Cable for Kid Trax Ride-on Toys","description":"\u003cp\u003eThis Battery Tender Accessory Cable is a high-quality, durable solution designed for Kid Trax Ride-on Toys. Designed compatibility with Battery Tender chargers, this cable ensures a secure and reliable connection, maximizing your ride-on toy's charging performance.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eHIGH QUALITY\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDurable and reliable, this Kid Trax accessory cable ensures a secure connection for your ride-on toy. Made to last, our cables provide a stable power supply, perfect for charging ride-on toys.    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEASY INSTALLATION\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOur Kid Trax accessory cable is designed to be used with some Battery Tender chargers for convenient installation. Simply connect one end to your charger and one end into your ride-on toy.    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOPTIMAL CHARGING PERFORMANCE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMaximize your ride-on toy's efficiency with our Kid Trax accessory cable. Designed to deliver a steady and reliable charge, it ensures your ride-on toy is always ready for action, providing peace of mind.    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCOMPATIBILITY\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis cable is specifically engineered to connect to a Battery Tender charger to seamlessly charge Kid Trax Ride-on Toy models including Dually Mossy Oak, Ram 3500 Dually, Ram Dually, CAT Bulldozer, and VW Beetle. \u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155563364550,"sku":"081-0175-ROT","price":22.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-accessory-cable-for-kid-trax-ride-on-toys-081-0175-rot-59515402781041.png?v=1788837134"},{"product_id":"accessory-cable-for-12v-6v-dynacraft-huffy-pulse-performance-products-and-razor-ride-on-toys","title":"Accessory Cable for 12V \/ 6V Dynacraft, Huffy, Pulse Performance Products and Razor Ride-on Toys","description":"\u003cp\u003eThis Battery Tender Accessory Cable is a high-quality, durable solution designed for 12V and 6V Dynacraft, Huffy, Pulse Performance, and Razor Ride-on Toys. Designed compatibility with Battery Tender chargers, this cable ensures a secure and reliable connection, maximizing your ride-on toy's charging performance.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eHIGH QUALITY\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDurable and reliable, this Dynacraft, Huffy, Pulse Performance, and Razor accessory cable ensures a secure connection for your ride-on toy. Made to last, our cables provide a stable 12V or 6V power supply, perfect for charging ride-on toys.    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEASY INSTALLATION\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOur Dynacraft, Huffy, Pulse Performance, and Razor accessory cable is designed to be used with some Battery Tender chargers for convenient installation. Simply connect one end to your charger and one end into your ride-on toy.    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOPTIMAL CHARGING PERFORMANCE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMaximize your ride-on toy's efficiency with our Dynacraft, Huffy, Pulse Performance, and Razor accessory cable. Designed to deliver a steady and reliable charge, it ensures your ride-on toy is always ready for action, providing peace of mind.    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCOMPATIBILITY\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis cable is specifically engineered to connect to a Battery Tender charger to seamlessly charge Dynacraft, Huffy, Pulse Performance, and Razor Ride-on Toy models including Pulse GTR Scooter, Dynacraft Camo SUV, Dynacraft BMW Car, Huffy Minnie Roadster, Huffy Star Wars X-Wing, Razor Power Scooter.\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155563921606,"sku":"081-0174-ROT","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-accessory-cable-for-12v-6v-dynacraft-huffy-pulse-performance-products-and-razor-ride-on-toys-081-0174-rot-59515394228593.png?v=1788837136"},{"product_id":"accessory-cable-for-6v-kid-trax-and-goodbaby-ride-on-toys","title":"Accessory Cable for 6V Kid Trax and Goodbaby Ride-on Toys","description":"\u003cp\u003eThis Battery Tender Accessory Cable is a high-quality, durable solution designed for 6V Kid Trax and Goodbaby Ride-on Toys. Designed compatibility with Battery Tender chargers, this cable ensures a secure and reliable connection, maximizing your ride-on toy's charging performance.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eHIGH QUALITY\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDurable and reliable, this Kid Trax and Goodbaby accessory cable ensures a secure connection for your ride-on toy. Made to last, our cables provide a stable 6V power supply, perfect for charging ride-on toys.    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEASY INSTALLATION\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOur Kid Trax and Goodbaby accessory cable is designed to be used with some Battery Tender chargers for convenient installation. Simply connect one end to your charger and one end into your ride-on toy.    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOPTIMAL CHARGING PERFORMANCE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMaximize your ride-on toy's efficiency with our Kid Trax and Goodbaby accessory cable. Designed to deliver a steady and reliable charge, it ensures your ride-on toy is always ready for action, providing peace of mind.    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCOMPATIBILITY\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis cable is specifically engineered to connect to a Battery Tender charger to seamlessly charge Kid Trax and Goodbaby Ride-on Toy models including CAT Tractor, TMNT Party Wagon, Chevy Tahoe SUV, and VW Bus.\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155564052678,"sku":"081-0173-ROT","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-accessory-cable-for-6v-kid-trax-and-goodbaby-ride-on-toys-081-0173-rot-59515387347313.png?v=1788837137"},{"product_id":"accessory-cable-for-12v-6v-peg-perego-ride-on-toys","title":"Accessory Cable for 12V \/ 6V Peg Perego Ride-on Toys","description":"\u003cp\u003eThis Battery Tender Accessory Cable is a high-quality, durable solution designed for 12V and 6V Peg Perego Ride-on Toys. Designed compatibility with Battery Tender chargers, this cable ensures a secure and reliable connection, maximizing your ride-on toy's charging performance.\u003c\/p\u003e\u003chr\u003e\u003cp\u003eHIGH QUALITY\u003c\/p\u003e\u003cp\u003eDurable and reliable, this Peg Perego accessory cable ensures a secure connection for your ride-on toy. Made to last, our cables provide a stable 12V or 6V power supply, perfect for charging ride-on toys.    \u003c\/p\u003e\u003cp\u003eEASY INSTALLATION\u003c\/p\u003e\u003cp\u003eOur Peg Perego accessory cable is designed to be used with some Battery Tender chargers for convenient installation. Simply connect one end to your charger and one end into your ride-on toy.    \u003c\/p\u003e\u003cp\u003eOPTIMAL CHARGING PERFORMANCE\u003c\/p\u003e\u003cp\u003eMaximize your ride-on toy's efficiency with our Peg Perego accessory cable. Designed to deliver a steady and reliable charge, it ensures your ride-on toy is always ready for action, providing peace of mind.    \u003c\/p\u003e\u003cp\u003eCOMPATIBILITY\u003c\/p\u003e\u003cp\u003eThis cable is specifically engineered to connect to a Battery Tender charger to seamlessly charge Peg Perego Ride-on Toy models including John Deere Tractor and John Deere Gator.\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155564216518,"sku":"081-0176-ROT","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-accessory-cable-for-12v-6v-peg-perego-ride-on-toys-081-0176-rot-59515421458801.png?v=1788837140"},{"product_id":"accessory-cable-for-12v-6v-fischer-price-power-wheels-ride-on-toys","title":"Accessory Cable for 12V \/ 6V Fischer-Price Power Wheels Ride-on Toys","description":"\u003cp\u003eThis Battery Tender Accessory Cable is a high-quality, durable solution designed for 12V and 6V Fisher-Price Power Wheels Ride-on Toys. Designed compatibility with Battery Tender chargers, this cable ensures a secure and reliable connection, maximizing your ride-on toy's charging performance.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eHIGH QUALITY\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDurable and reliable, this Fischer-Price Power Wheels accessory cable ensures a secure connection for your ride-on toy. Made to last, our cables provide a stable 12V or 6V power supply, perfect for charging ride-on toys.    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEASY INSTALLATION\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOur Fischer-Price Power Wheels accessory cable is designed to be used with some Battery Tender chargers for convenient installation. Simply connect one end to your charger and one end into your ride-on toy.    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOPTIMAL CHARGING PERFORMANCE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMaximize your ride-on toy's efficiency with our Fischer-Price Power Wheels accessory cable. Designed to deliver a steady and reliable charge, it ensures your ride-on toy is always ready for action, providing peace of mind.    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCOMPATIBILITY\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis cable is specifically engineered to connect to a Battery Tender charger to seamlessly charge Fischer-Price Power Wheels Ride-on Toy models including Artic Cat ATV, Barbie KFX, Black Jeep, Dune Racer, Ford F-150, and Hot Wheels Jeep Wrangler.\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155564282054,"sku":"081-0171-ROT","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-accessory-cable-for-12v-6v-fischer-price-power-wheels-ride-on-toys-081-0171-rot-59515377942897.png?v=1788837140"},{"product_id":"accessory-cable-for-12v-6v-action-wheels-ride-on-toys","title":"Accessory Cable for 12V \/ 6V Action Wheels Ride-on Toys","description":"\u003cp\u003eThis Battery Tender accessory cable is a high-quality, durable solution designed for 12V and 6V Action Wheels Ride-on Toys. Designed compatibility with Battery Tender chargers, this cable ensures a secure and reliable connection, maximizing your ride-on toy's charging performance.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eHIGH QUALITY\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDurable and reliable, this Action Wheels accessory cable ensures a secure connection for your ride-on toy. Made to last, our cables provide a stable 12V or 6V power supply, perfect for charging ride-on toys.    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEASY INSTALLATION\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOur Action Wheels accessory cable is designed to be used with some Battery Tender chargers for convenient installation. Simply connect one end to your charger and one end into your ride-on toy.    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOPTIMAL CHARGING PERFORMANCE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMaximize your ride-on toy's efficiency with our Action Wheels accessory cable. Designed to deliver a steady and reliable charge, it ensures your ride-on toy is always ready for action, providing peace of mind.    \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCOMPATIBILITY\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis cable is specifically engineered to connect to a Battery Tender charger to seamlessly charge Action Wheels Ride-on Toy models including Frozen SUV, Yamaha Raptor, Girls' Yamaha Raptor, and Princess Coupe.\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155564347590,"sku":"081-0170-ROT","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-accessory-cable-for-12v-6v-action-wheels-ride-on-toys-081-0170-rot-59515337703793.png?v=1788837142"},{"product_id":"tesla-charger-adapter-1","title":"Battery Tender® J1772 to Tesla Adapter","description":"\u003cp\u003eThe Battery Tender® J1772 Adapter allows Tesla vehicles to charge from any J1772 Level 1 or Level 2 charging station — including all Battery Tender® eCharge units. No tools, no installation, no configuration required.\u003c\/p\u003e\u003ch3\u003eWhat It Does\u003c\/h3\u003e\u003cp\u003eJ1772 is the North American standard connector used on virtually all non-Tesla Level 1 and Level 2 charging equipment. Tesla vehicles use a proprietary connector. The Battery Tender® J1772 Adapter bridges the two standards — connect the adapter to the J1772 charging handle and plug directly into the Tesla vehicle's charging port.\u003c\/p\u003e\u003ch3\u003eCompatible With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAll Battery Tender® eCharge Level 1 and Level 2 charging units\u003c\/li\u003e\n\u003cli\u003eAny third-party J1772 Level 1 or Level 2 charging station\u003c\/li\u003e\n\u003cli\u003eAll Tesla vehicle models with the standard Tesla charging port\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eUsage\u003c\/h3\u003e\u003cp\u003eAttach the adapter to the J1772 charging handle before connecting to the Tesla vehicle. Remove and store when not in use. Charging speed is determined by the station's output rating and the Tesla vehicle's onboard charger capacity — the adapter does not alter or limit either.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLimited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155564806342,"sku":"081-0400","price":44.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-tesla-charger-adapter-081-0400-59414680600945.png?v=1788837144"},{"product_id":"5-ft-extension-cord-for-powerplus-battery-chargers-14-gauge-weatherproof-for-industrial-outdoor-and-marine-applications-5-foot-extension-cable","title":"PowerPlus 5ft Extension Cable","description":"\u003cp\u003eExtends the output cable of any Battery Tender® PowerPlus on-board charger by 5 feet using a heavy-gauge cable and connector assembly built for the PowerPlus line's high-output, high-IP-rated installation environments. When the PowerPlus charger is mounted at a distance from the battery — in a separate equipment bay, at a centralized charging panel, or in a location dictated by AC power access — the 5ft extension provides the additional reach without compromising connection quality or weatherproof integrity.\u003c\/p\u003e\n\u003ch3\u003eBuilt for High-Output On-Board Applications\u003c\/h3\u003e\n\u003cp\u003eThe PowerPlus extension cable is rated for the higher amperage output of the PowerPlus line — up to 26 Amps at 12V — with heavy-gauge conductors and sealed connectors matched to the PowerPlus line's IP-rated connector standard. Not interchangeable with standard SAE quick disconnect extension cables.\u003c\/p\u003e\n\u003ch3\u003eCompatible Battery Tender® Chargers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBattery Tender® PowerPlus 12V 26 Amp\u003c\/li\u003e\n\u003cli\u003eBattery Tender® PowerPlus 24V 20 Amp\u003c\/li\u003e\n\u003cli\u003eBattery Tender® PowerPlus 36V 18 Amp\u003c\/li\u003e\n\u003cli\u003eBattery Tender® PowerPlus 48V 15 Amp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cp\u003eCommercial vehicles and trucks with centralized charging panel installations where battery access requires additional cable reach, marine vessels with PowerPlus chargers mounted in engine rooms and battery banks in forward or aft compartments, industrial equipment and forklifts where the charger mounting location is separated from the battery by equipment structure, and golf carts and utility vehicles where the PowerPlus charger is mounted remotely from the battery bank.\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155564839110,"sku":"081-0209-5","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-5-ft-extension-cord-for-powerplus-battery-chargers-081-0209-5-59635482263921.png?v=1788837145"},{"product_id":"10-ft-marine-extension-cord-for-wavecharge-pro-14-gauge-weatherproof-for-marine-applications-10-foot-extension-cable","title":"WaveCharge 10ft Marine Extension Cable","description":"\u003cp\u003eExtends the output cable of any Battery Tender® WaveCharge on-board charger bank by 10 feet with a marine-grade cable and connector assembly built for permanent installation in salt air, bilge, and below-deck environments. For larger boats where the WaveCharge unit and a battery bank are separated by more than 5 feet, the 10ft marine extension bridges the gap without compromising waterproof integrity or requiring relocation of either the charger or the battery.\u003c\/p\u003e\u003ch3\u003eMarine-Grade Construction\u003c\/h3\u003e\u003cp\u003eTinned copper conductors and waterproof sealed connectors rated for permanent installation in wet marine environments. Corrosion-resistant throughout — suitable for bilge-adjacent routing, engine room installation, and any location subject to salt air, condensation, and moisture exposure.\u003c\/p\u003e\u003ch3\u003eCompatible Battery Tender® Chargers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWaveCharge 2-Bank 12V 6 Amp\u003c\/li\u003e\n\u003cli\u003eWaveCharge 3-Bank 12V 9 Amp\u003c\/li\u003e\n\u003cli\u003eWaveCharge 4-Bank 12V 12 Amp\u003c\/li\u003e\n\u003cli\u003eWaveCharge Pro 2-Bank 12V 20 Amp\u003c\/li\u003e\n\u003cli\u003eWaveCharge Pro 3-Bank 12V 30 Amp\u003c\/li\u003e\n\u003cli\u003eWaveCharge Pro 4-Bank 12V 40 Amp\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhen to Use the 10ft Marine Extension\u003c\/h3\u003e\u003cp\u003eUse the 10ft marine extension on larger boats where battery banks are distributed across significant distance — engine rooms at amidships with batteries mounted forward or aft, helm-area electrical panels with stern battery banks, liveaboard boats with house batteries separated from the charger by multiple compartments, or any multi-bank installation where one or more banks require more than 5 feet of additional reach.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155564904646,"sku":"081-0208-10","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-10-foot-marine-extension-cord-for-wavecharge-pro-14-gauge-081-0208-10-52897959281009.png?v=1788837146"},{"product_id":"5-foot-marine-extension-cord-for-wavecharge-pro-14-gauge-weatherproof-for-marine-applications-5-foot-extension-cable","title":"WaveCharge 5ft Marine Extension Cable","description":"\u003cp\u003eExtends the output cable of any Battery Tender® WaveCharge on-board charger bank by 5 feet with a marine-grade cable and connector assembly rated for permanent installation in the harshest marine environments. Where the WaveCharge unit is mounted in an engine compartment, electrical panel, or above-deck enclosure and the battery bank is beyond standard cable reach, the 5ft marine extension provides the additional length needed without compromising the waterproof integrity of the installation.\u003c\/p\u003e\u003ch3\u003eMarine-Grade Construction\u003c\/h3\u003e\u003cp\u003eTinned copper conductors resist corrosion in salt air and marine humidity. Waterproof sealed connectors maintain the system's protection rating in bilge, engine room, and below-deck installations. Built to the same construction standard as the WaveCharge charger line itself for permanent, maintenance-free installation.\u003c\/p\u003e\u003ch3\u003eCompatible Battery Tender® Chargers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWaveCharge 2-Bank 12V 6 Amp\u003c\/li\u003e\n\u003cli\u003eWaveCharge 3-Bank 12V 9 Amp\u003c\/li\u003e\n\u003cli\u003eWaveCharge 4-Bank 12V 12 Amp\u003c\/li\u003e\n\u003cli\u003eWaveCharge Pro 2-Bank 12V 20 Amp\u003c\/li\u003e\n\u003cli\u003eWaveCharge Pro 3-Bank 12V 30 Amp\u003c\/li\u003e\n\u003cli\u003eWaveCharge Pro 4-Bank 12V 40 Amp\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhen to Use the 5ft Marine Extension\u003c\/h3\u003e\u003cp\u003eUse when the WaveCharge unit is mounted at the helm, in the forward electrical panel, or in the engine compartment and one or more battery banks are positioned beyond the standard output cable reach — forward battery banks on larger boats, aft battery compartments relative to amidships charger mounting, or any layout where the standard cable falls short of a specific bank's terminal location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155564970182,"sku":"081-0207-5","price":22.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-5-foot-marine-extension-cord-for-wavecharge-pro-14-gauge-weatherproof-for-marine-applications-5-foot-extension-cable-081-0207-5-52897942536561.png?v=1788837148"},{"product_id":"powerplus-48v-battery-charger","title":"PowerPlus 48V 15 Amp Battery Charger and Maintainer","description":"\u003cp\u003eThe Battery Tender® PowerPlus™ 48V 15 Amp is engineered for both portable use and permanent on-board installation — delivering intelligent charging to 48V battery systems in golf carts, industrial electric vehicles, marine electric propulsion systems, and solar storage applications. IP68 waterproofing, UL marine ignition protection, Multi-Chemistry support for lead-acid and Lithium, and Battery Tender®'s ISM (Infinite Sequential Monitoring™) in a charger built for demanding environments.\u003c\/p\u003e\u003ch3\u003e48V — The Growing Standard for Electric Vehicle and Storage Applications\u003c\/h3\u003e\u003cp\u003e48V battery systems deliver more power at lower current than equivalent 12V or 24V systems — reducing cable weight, heat generation, and efficiency losses across the system. Modern golf carts, industrial forklifts, electric personnel carriers, and marine electric propulsion systems increasingly use 48V as the standard configuration. The PowerPlus™ 48V 15 Amp delivers 15 Amp charging at this voltage, with ISM managing the full charge cycle automatically from initial recovery through indefinite float maintenance.\u003c\/p\u003e\u003ch3\u003eIP68 — Installation in Any Environment\u003c\/h3\u003e\u003cp\u003eIP68 certification provides complete dust protection and water immersion resistance exceeding IP67 standards. The PowerPlus™ 48V 15 Amp can be permanently mounted in exposed equipment bays, bilge-adjacent compartments, and wet storage environments where standard chargers cannot be installed. Golf carts stored outdoors, marine vessels with electric propulsion, and industrial equipment operating in wash-down environments are all supported.\u003c\/p\u003e\u003ch3\u003eUL Marine Ignition Protection\u003c\/h3\u003e\u003cp\u003eCertified to not produce ignition-capable sparks during operation or connection in the presence of fuel vapors — the independent certification required for charging equipment installed in enclosed marine spaces. The PowerPlus™ 48V 15 Amp is suitable for marine electric propulsion and house battery applications in vessels where ignition-protected equipment is mandatory.\u003c\/p\u003e\u003ch3\u003eMulti-Chemistry: Lead-Acid and Lithium at 48V\u003c\/h3\u003e\u003cp\u003eA chemistry selector delivers the correct ISM charging profile for either lead-acid or Lithium (LiFePO4) batteries at 48V. The transition to Lithium in 48V applications — golf carts, industrial EVs, and solar storage — is well underway. The PowerPlus™ 48V 15 Amp supports both chemistries at full 15 Amp output, making it a compatible installation for current lead-acid systems and future Lithium upgrades without changing the charger.\u003c\/p\u003e\u003ch3\u003eISM: 4-Stage Charging at 15 Amp\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization\u003c\/strong\u003e — Battery health check before current flows at the selected chemistry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Charge\u003c\/strong\u003e — Full 15 Amp output restores depleted capacity at 48V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorption\u003c\/strong\u003e — Current tapers automatically as the battery approaches full charge, preventing overcharge for lead-acid and Lithium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Maintenance\u003c\/strong\u003e — Correct maintenance protocol for the selected chemistry delivered 24\/7, indefinitely\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatible battery size range: 40Ah to 200Ah at 48V. Lead-acid: flooded, AGM, gel cell, sealed MF. Lithium: LiFePO4.\u003c\/p\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGolf carts with 48V battery configurations — lead-acid or Lithium\u003c\/li\u003e\n\u003cli\u003eIndustrial forklifts and material handling equipment\u003c\/li\u003e\n\u003cli\u003eElectric personnel carriers and campus vehicles\u003c\/li\u003e\n\u003cli\u003eMarine vessels with 48V electric propulsion systems\u003c\/li\u003e\n\u003cli\u003eSolar energy storage systems with 48V battery banks\u003c\/li\u003e\n\u003cli\u003eIndustrial equipment requiring on-board 48V charging\u003c\/li\u003e\n\u003cli\u003eAny 48V application requiring IP68 protection and UL marine ignition certification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAutomatic Temperature Compensation\u003c\/h3\u003e\u003cp\u003eCharge voltage adjusts automatically based on ambient temperature for lead-acid applications — ensuring complete charging in cold conditions and preventing overcharge in heat, without manual adjustment at any point.\u003c\/p\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUL marine ignition protection\u003c\/strong\u003e — certified safe for enclosed marine spaces\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpark-proof connection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReverse polarity protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIP68 sealed housing\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e2-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155565035718,"sku":"022-2014-DL-WH","price":379.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-powerplus-48v-15-amp-battery-charger-and-maintainer-022-2014-dl-wh-31074638692450.jpg?v=1788837150"},{"product_id":"powerplus-36v","title":"PowerPlus 36V 18 Amp Battery Charger and Maintainer","description":"\u003cp\u003eThe Battery Tender® PowerPlus™ 36V 18 Amp is engineered for both portable use and permanent on-board installation — bringing intelligent charging to 36V battery systems in golf carts, electric utility vehicles, industrial equipment, and marine applications with IP68 waterproofing, UL marine ignition protection, and Multi-Chemistry support for lead-acid and Lithium batteries.\u003c\/p\u003e\u003ch3\u003e36V On-Board Charging\u003c\/h3\u003e\u003cp\u003e36V battery systems are standard in many golf cart configurations, electric utility vehicles, and certain industrial applications. The PowerPlus™ 36V 18 Amp delivers 18 Amp output at 36V — sufficient to recover a depleted 150Ah 36V battery bank in approximately 8 hours — with ISM (Infinite Sequential Monitoring™) managing bulk charge, absorption, and float maintenance automatically. As a permanent on-board charger, it eliminates the need for external charging stations or manual connection to a portable unit each session.\u003c\/p\u003e\u003ch3\u003eIP68 Waterproof — Install Anywhere\u003c\/h3\u003e\u003cp\u003eIP68 certification provides complete dust protection and water immersion resistance beyond IP67 standards. The PowerPlus™ 36V 18 Amp can be permanently mounted in exposed locations on golf carts, in equipment bays on utility vehicles, and in wet compartments on marine vessels where standard chargers cannot be installed. No protective enclosure required.\u003c\/p\u003e\u003ch3\u003eUL Marine Ignition Protection\u003c\/h3\u003e\u003cp\u003eCertified to not produce ignition-capable sparks during operation or connection — the requirement for charging equipment installed in enclosed marine spaces near fuel systems. The PowerPlus™ 36V 18 Amp is suitable for marine applications where 36V propulsion or house systems require an ignition-protected on-board charger.\u003c\/p\u003e\u003ch3\u003eMulti-Chemistry: Lead-Acid and Lithium at 36V\u003c\/h3\u003e\u003cp\u003eA chemistry selector delivers the correct ISM charging profile for either lead-acid or Lithium (LiFePO4) batteries at 36V. The golf cart and utility vehicle market is actively transitioning from flooded lead-acid to Lithium battery packs — the PowerPlus™ 36V 18 Amp supports both chemistries at full 18 Amp output, making it a future-compatible installation regardless of current battery type.\u003c\/p\u003e\u003ch3\u003eISM: 4-Stage Charging at 18 Amp\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization\u003c\/strong\u003e — Battery health check before current flows at the selected chemistry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Charge\u003c\/strong\u003e — Full 18 Amp output restores depleted capacity at 36V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorption\u003c\/strong\u003e — Current tapers automatically as the battery approaches full charge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Maintenance\u003c\/strong\u003e — Correct protocol for lead-acid or Lithium delivered 24\/7, indefinitely\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatible battery size range: 40Ah to 250Ah at 36V. Lead-acid: flooded, AGM, gel cell, sealed MF. Lithium: LiFePO4.\u003c\/p\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGolf carts with 36V battery configurations\u003c\/li\u003e\n\u003cli\u003eElectric utility vehicles and personnel carriers\u003c\/li\u003e\n\u003cli\u003eIndustrial floor equipment with 36V systems\u003c\/li\u003e\n\u003cli\u003eMarine vessels with 36V propulsion or house battery systems\u003c\/li\u003e\n\u003cli\u003eSpecialty electric vehicles requiring on-board 36V charging\u003c\/li\u003e\n\u003cli\u003eAny 36V lead-acid or Lithium application requiring IP68 and UL marine ignition protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAutomatic Temperature Compensation\u003c\/h3\u003e\u003cp\u003eCharge voltage adjusts automatically based on ambient temperature for lead-acid applications — ensuring complete charging in cold storage and preventing overcharge in summer heat, without manual adjustment.\u003c\/p\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eUL marine ignition protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpark-proof connection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReverse polarity protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIP68 sealed housing\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e2-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155565134022,"sku":"022-2013-DL-WH","price":359.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/022-2013-DL-WH-1.jpg?v=1788837151"},{"product_id":"powerplus-24v","title":"PowerPlus 24V 20 Amp Battery Charger and Maintainer","description":"\u003cp\u003eThe Battery Tender® PowerPlus™ 24V 20 Amp is engineered for both portable use and permanent on-board installation — suited for commercial marine vessels, large diesel trucks, industrial equipment, and any application running 24V battery systems in demanding environments. IP68 waterproof, UL marine ignition protection, and full Multi-Chemistry support for both lead-acid and Lithium batteries at full 20 Amp output.\u003c\/p\u003e\u003ch3\u003e24V On-Board Charging for Commercial and Marine Applications\u003c\/h3\u003e\u003cp\u003e24V battery systems are standard in large commercial vessels, ocean-going fishing boats, heavy-duty trucks, agricultural machinery, and industrial equipment where the additional voltage provides the power density required for demanding electrical loads. At 20 Amp output, the PowerPlus™ 24V 20 Amp charges large 24V lead-acid and Lithium battery banks efficiently — recovering a 200Ah 24V battery in approximately 10 hours at full output — with ISM (Infinite Sequential Monitoring™) managing the full charge cycle and transition to float maintenance automatically.\u003c\/p\u003e\u003ch3\u003eIP68 — Installation in Wet Environments\u003c\/h3\u003e\u003cp\u003eIP68 certification provides complete dust protection and water immersion resistance at manufacturer-specified depth, exceeding the IP67 standard. The PowerPlus™ 24V 20 Amp can be permanently installed in bilge compartments, engine rooms, and enclosed wet areas where water exposure is routine. No shelter, no protective enclosure, no periodic removal required.\u003c\/p\u003e\u003ch3\u003eUL Marine Ignition Protection\u003c\/h3\u003e\u003cp\u003eCertified to not produce sparks capable of igniting fuel vapors during normal operation or connection — the independent certification required for any charging device installed in enclosed marine spaces near fuel systems. The PowerPlus™ 24V 20 Amp is suitable for installation in engine rooms and bilge areas where ignition-protected equipment is mandatory.\u003c\/p\u003e\u003ch3\u003eMulti-Chemistry: Lead-Acid and Lithium at 24V\u003c\/h3\u003e\u003cp\u003eA chemistry selector delivers the correct ISM profile for either lead-acid or Lithium (LiFePO4) batteries at 24V. Commercial vessels and industrial equipment increasingly use Lithium battery systems for their weight and cycle life advantages — the PowerPlus™ 24V 20 Amp supports both chemistries at full 20 Amp output.\u003c\/p\u003e\u003ch3\u003eISM: 4-Stage Charging at 20 Amp\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization\u003c\/strong\u003e — Battery health check before current flows at the selected chemistry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Charge\u003c\/strong\u003e — Full 20 Amp output restores depleted capacity at 24V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorption\u003c\/strong\u003e — Current tapers automatically as the battery approaches full charge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Maintenance\u003c\/strong\u003e — Correct maintenance protocol for the selected chemistry delivered 24\/7, indefinitely\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatible battery size range: 40Ah to 300Ah at 24V. Lead-acid: flooded, AGM, gel cell, sealed MF. Lithium: LiFePO4.\u003c\/p\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCommercial and fishing vessels with 24V house battery systems\u003c\/li\u003e\n\u003cli\u003eLarge diesel trucks and commercial vehicles with 24V batteries\u003c\/li\u003e\n\u003cli\u003eAgricultural and construction equipment with 24V systems\u003c\/li\u003e\n\u003cli\u003eIndustrial equipment requiring permanent on-board 24V charging\u003c\/li\u003e\n\u003cli\u003eRVs and large campers with 24V electrical systems\u003c\/li\u003e\n\u003cli\u003eMarine vessels transitioning from 24V lead-acid to Lithium\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAutomatic Temperature Compensation\u003c\/h3\u003e\u003cp\u003eCharge voltage adjusts automatically based on ambient temperature for lead-acid applications — ensuring complete charging in cold conditions and preventing overcharge in heat. Critical for vessels operating across seasonal temperature ranges.\u003c\/p\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUL marine ignition protection\u003c\/strong\u003e — certified for enclosed marine spaces\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpark-proof connection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReverse polarity protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIP68 sealed housing\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e2-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155565199558,"sku":"022-2012-DL-WH","price":359.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-powerplus-24v-20-amp-on-board-battery-charger-and-maintainer-022-2012-dl-wh-31074589769826.jpg?v=1788837153"},{"product_id":"powerplus-12v","title":"PowerPlus 12V 26 Amp Battery Charger and Maintainer","description":"\u003cp\u003eThe Battery Tender® PowerPlus™ 12V 26 Amp is engineered for both portable use and permanent on-board installation — equally at home as a wall-mounted shop charger or wired directly into a vessel or vehicle. The highest-output 12V model in the PowerPlus™ line, it delivers 26 Amp charging for large marine house batteries and commercial vehicle battery banks with IP68 waterproofing, UL marine ignition protection, and Battery Tender®'s ISM (Infinite Sequential Monitoring™) intelligence built in.\u003c\/p\u003e\u003ch3\u003eIP68: The Highest Waterproof Rating in the Battery Tender® Lineup\u003c\/h3\u003e\u003cp\u003eIP68 certification exceeds IP67 — providing complete dust protection and water immersion resistance at manufacturer-specified depth, typically 1.5 meters or greater. Where IP67 is suitable for outdoor mounting with rain and splash exposure, IP68 is the rating required for bilge-adjacent installation, submersible-environment mounting, and any location where prolonged water exposure is possible. The PowerPlus™ 12V 26 Amp can be permanently installed in locations that no other Battery Tender® charger can survive.\u003c\/p\u003e\u003ch3\u003eUL Marine Ignition Protection\u003c\/h3\u003e\u003cp\u003eIn enclosed marine spaces — engine rooms, bilge compartments, fuel storage areas — electrical sparks can ignite fuel vapors with catastrophic results. UL marine ignition protection is an independent certification that the PowerPlus™ 12V 26 Amp will not produce a spark capable of igniting a fuel vapor mixture during normal operation or connection. This certification is a requirement for any charging device installed in an enclosed marine space and is not found on standard portable chargers.\u003c\/p\u003e\u003ch3\u003eMulti-Chemistry: Lead-Acid and Lithium\u003c\/h3\u003e\u003cp\u003eA chemistry selector delivers the correct ISM charging profile for either lead-acid (flooded, AGM, GEL, sealed MF) or Lithium (LiFePO4) batteries. As marine vessels transition from lead-acid to Lithium house battery systems, the PowerPlus™ 12V 26 Amp supports both chemistries at full 26 Amp output without requiring a charger change.\u003c\/p\u003e\u003ch3\u003eISM: 4-Stage Charging at 26 Amp\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization\u003c\/strong\u003e — Battery health check and polarity confirmation before current flows\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Charge\u003c\/strong\u003e — Full 26 Amp output restores depleted capacity rapidly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorption\u003c\/strong\u003e — Current tapers automatically as the battery approaches full charge, preventing overcharge damage for lead-acid and Lithium alike\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Maintenance\u003c\/strong\u003e — Correct maintenance protocol for the selected chemistry delivered 24\/7, indefinitely\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatible battery size range: 40Ah to 400Ah at 12V. Lead-acid: flooded, AGM, gel cell, sealed MF. Lithium: LiFePO4.\u003c\/p\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMarine vessels with large 12V lead-acid or Lithium house battery banks\u003c\/li\u003e\n\u003cli\u003eCommercial and fishing vessels requiring bilge-area or engine room installation\u003c\/li\u003e\n\u003cli\u003eLarge RVs and campers with high-capacity 12V battery systems\u003c\/li\u003e\n\u003cli\u003eCommercial trucks and vehicles with large 12V battery banks\u003c\/li\u003e\n\u003cli\u003eIndustrial equipment requiring on-board or wall-mounted charging\u003c\/li\u003e\n\u003cli\u003eAny 12V application requiring IP68 protection and UL marine ignition certification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAutomatic Temperature Compensation\u003c\/h3\u003e\u003cp\u003eCharge voltage adjusts automatically based on ambient temperature — increasing in cold conditions to ensure complete charging, reducing in heat to prevent overcharging. Essential for marine and industrial environments where temperature variation is significant and manual adjustment is impractical.\u003c\/p\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUL marine ignition protection\u003c\/strong\u003e — certified safe for use in fuel vapor environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpark-proof connection\u003c\/strong\u003e — no current flows until connection is confirmed correct\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReverse polarity protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIP68 sealed housing\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e2-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155565265094,"sku":"022-2011-DL-WH","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/022-2011-DL-WH-1.jpg?v=1788837154"},{"product_id":"charging-plug-48v-dc-plug-accessory-cable-fits-e-z-go-txt-rxv-3-pin-triangle-handle-connector","title":"PowerPlus 48V E-Z-GO TXT\/RXV 3-Pin Plug","description":"\u003cp\u003eThe Battery Tender® 48V E-Z-GO TXT\/RXV 3-Pin Golf Cart Plug is an OEM-style 3-pin connector adapter that allows the Battery Tender® PowerPlus 48V 15 Amp on-board charger to connect directly to the factory 3-pin triangle handle charge port on E-Z-GO TXT and RXV golf carts — no battery terminal access required, no wiring modifications, no tools.\u003c\/p\u003e\u003ch3\u003eWhy Use the Factory Charge Port\u003c\/h3\u003e\u003cp\u003eDirect connection through the factory charge port preserves the battery compartment seal, eliminates the terminal corrosion associated with repeated direct connections, and enables permanent charger installation for automatic ISM float maintenance whenever the cart is stored. The 3-pin OEM connector matches the TXT and RXV factory port exactly.\u003c\/p\u003e\u003ch3\u003e3-Pin vs. Standard E-Z-GO Connector\u003c\/h3\u003e\u003cp\u003eE-Z-GO 48V carts use different charge port configurations depending on model and year. The TXT and RXV use a 3-pin triangle handle charge port that requires this specific adapter. Verify the charge port configuration on the specific cart before ordering.\u003c\/p\u003e\u003ch3\u003eCompatible Vehicles\u003c\/h3\u003e\u003cp\u003eE-Z-GO TXT and RXV golf carts with 48V battery configurations.\u003c\/p\u003e\u003ch3\u003eCompatible Charger\u003c\/h3\u003e\u003cp\u003eBattery Tender® PowerPlus 48V 15 Amp on-board battery charger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155565330630,"sku":"081-0205-EZ","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-powerplus-48v-dc-plug-accessory-cable-e-z-go-3-pin-triangle-handle-081-0205-ez-52890972553585.png?v=1788837156"},{"product_id":"charging-plug-36v-dc-plug-accessory-cable-fits-e-z-go-10l0l-2-prong-angled-crow-foot-plug","title":"PowerPlus 36V E-Z-GO Crow Foot Plug","description":"\u003cp\u003eThe Battery Tender® 36V E-Z-GO Crow Foot Golf Cart Plug is a crow foot style OEM connector adapter that allows the Battery Tender® PowerPlus 36V 18 Amp on-board charger to connect directly to the crow foot factory charge port on compatible E-Z-GO golf carts — without battery terminal access, wiring modifications, or tools.\u003c\/p\u003e\u003ch3\u003eWhy Use the Factory Charge Port\u003c\/h3\u003e\u003cp\u003eConnecting through the factory charge port preserves the battery compartment seal, eliminates terminal corrosion from repeated direct connections, and allows the PowerPlus charger to remain permanently wired for automatic ISM float maintenance charging whenever the cart is parked and plugged in.\u003c\/p\u003e\u003ch3\u003eCrow Foot vs. Standard E-Z-GO Connector\u003c\/h3\u003e\u003cp\u003eE-Z-GO golf carts use two different 36V charge port styles — the standard Medalist\/TXT connector and the crow foot style used on certain model configurations. Verify the charge port style on the specific cart before ordering. For standard E-Z-GO Medalist\/TXT ports, use the Battery Tender® 36V E-Z-GO Medalist\/TXT plug (081-0201-EZ).\u003c\/p\u003e\u003ch3\u003eCompatible Vehicle\u003c\/h3\u003e\u003cp\u003eE-Z-GO golf carts with 36V battery systems equipped with 2-prong angled crow foot style charge port.\u003c\/p\u003e\u003ch3\u003eCompatible Charger\u003c\/h3\u003e\u003cp\u003eBattery Tender® PowerPlus 36V 18 Amp on-board battery charger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155565396166,"sku":"081-0203-EZ","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-powerplus-36v-dc-plug-accessory-cable-e-z-go-2-prong-angled-crow-foot-081-0203-ez-52890972488049.png?v=1788837157"},{"product_id":"charging-plug-48v-mac-dc-plug-accessory-cable-fits-yamaha-g19-g22-g29","title":"PowerPlus 48V Yamaha G19\/G22\/G29 Plug","description":"\u003cp\u003eThe Battery Tender® 48V Yamaha Golf Cart Plug is an OEM-style connector adapter that allows the Battery Tender® PowerPlus 48V 15 Amp on-board charger to connect directly to the factory charge port on Yamaha G19, G22, and G29 golf carts — without direct battery terminal access, wiring modification, or tools.\u003c\/p\u003e\u003ch3\u003eWhy Use the Factory Charge Port\u003c\/h3\u003e\u003cp\u003eConnecting through the Yamaha factory charge port preserves the battery compartment's protective seal, prevents terminal corrosion from repeated direct clamp connections, and enables the PowerPlus charger to remain permanently wired to the cart for automatic ISM float maintenance whenever the cart is parked and plugged in. The OEM-style connector matches the Yamaha factory port exactly for a secure, weatherproof connection.\u003c\/p\u003e\u003ch3\u003eModel Coverage\u003c\/h3\u003e\u003cp\u003eDesigned for Yamaha G19, G22, and G29 golf cart models with 48V battery systems. Yamaha charge port configurations vary across model years and series — verify the specific port type on the cart before ordering.\u003c\/p\u003e\u003ch3\u003eCompatible Charger\u003c\/h3\u003e\u003cp\u003eBattery Tender® PowerPlus 48V 15 Amp on-board battery charger.\u003c\/p\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eConnects to the PowerPlus 48V charger output cable and plugs directly into the Yamaha factory charge port. Once installed, the cart connects to shore power automatically when parked — maintaining the 48V battery pack at full charge between rounds through continuous ISM float maintenance without manual connection each session.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155565461702,"sku":"081-0202-YAM","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-powerplus-48v-mac-dc-plug-yamaha-g19-g22-g29-081-0202-yam-52890972422513.png?v=1788837159"},{"product_id":"charging-plug-36v-dc-plug-accessory-cable-fits-e-z-go-1998-medalist-txt-dcs-pds","title":"PowerPlus 36V E-Z-GO Medalist\/TXT Plug","description":"\u003cp\u003eThe Battery Tender® 36V E-Z-GO Medalist\/TXT Golf Cart Plug is an OEM-style connector adapter that allows the Battery Tender® PowerPlus 36V 18 Amp on-board charger to connect directly to the factory charge port on E-Z-GO Medalist and TXT golf carts — no battery terminal access required, no wiring modification, no tools.\u003c\/p\u003e\u003ch3\u003eWhy Use the Factory Charge Port\u003c\/h3\u003e\u003cp\u003eConnecting through the factory charge port rather than directly to battery terminals preserves the integrity of the battery compartment seal, eliminates terminal corrosion from repeated clamp connections, and allows the charger to be permanently wired to the cart for automatic maintenance charging between uses. The OEM-style connector seats and locks in the factory port exactly as the original charger did.\u003c\/p\u003e\u003ch3\u003eCompatible Vehicle\u003c\/h3\u003e\u003cp\u003eE-Z-GO Medalist and TXT golf carts with 36V battery systems (DCS\/PDS models).\u003c\/p\u003e\u003ch3\u003eCompatible Charger\u003c\/h3\u003e\u003cp\u003eBattery Tender® PowerPlus 36V 18 Amp on-board battery charger.\u003c\/p\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eThe plug connects to the PowerPlus 36V charger's output cable and plugs directly into the E-Z-GO factory charge port. Permanent installation allows the cart to be connected to shore power automatically when parked — maintaining the 36V battery pack at full charge between rounds through ISM float maintenance without any manual connection required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155565527238,"sku":"081-0201-EZ","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-powerplus-36v-dc-plug-accessory-cable-e-z-go-medalist-txt-dcs-pds-081-0201-ez-52890972356977.png?v=1788837160"},{"product_id":"charging-plug-48v-dc-plug-accessory-cable-fits-1995-2013-club-car-ds-precedent","title":"PowerPlus 48V Club Car Plug","description":"\u003cp\u003eThe Battery Tender® 48V Club Car Golf Cart Plug is an OEM-style connector adapter that allows the Battery Tender® PowerPlus 48V 15 Amp on-board charger to connect directly to the factory charge port on Club Car DS and Precedent golf carts — eliminating direct battery terminal access and enabling permanent installation for automatic maintenance charging between uses.\u003c\/p\u003e\n\u003ch3\u003eWhy Use the Factory Charge Port\u003c\/h3\u003e\n\u003cp\u003eConnecting through the Club Car factory charge port preserves the battery compartment seal, prevents terminal corrosion from repeated direct clamp connections, and enables the PowerPlus charger to remain permanently connected for ISM float maintenance whenever the cart is stored. The OEM-style connector matches the factory port exactly — no modification required.\u003c\/p\u003e\n\u003ch3\u003eCompatible Vehicles\u003c\/h3\u003e\n\u003cp\u003eClub Car DS and Precedent golf carts with 48V battery configurations, model years 1995–2013. Verify the specific charge port configuration on the cart before purchasing.\u003c\/p\u003e\n\u003cp\u003eImportant Compatibility Note: This cable is not recommended for use with Club Car golf carts that require a 3rd pin connection to the On-Board Computer (OBC).\u003cbr\u003e\u003cbr\u003eKnown Incompatibility:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClub Car DS models (1998–2004) with 48V systems and OBC\u003c\/li\u003e\n\u003cli\u003eClub Car Precedent models (2004 and up) with OBC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese OBC-equipped models rely on the 3rd pin for battery charging regulation and energy usage tracking. If your cart uses OBC part numbers such as 101909901 (DS) or 102511001 (Precedent), this cable will not function correctly. Customers with these models should use a compatible charger cable that supports the 3rd pin ground connection.\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCompatible Charger\u003c\/h3\u003e\n\u003cp\u003eBattery Tender® PowerPlus 48V 15 Amp on-board battery charger.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eConnects to the PowerPlus 48V charger output cable and plugs directly into the Club Car factory charge port. Once permanently installed, the cart connects to shore power automatically when parked — PowerPlus ISM charging maintains the full 48V battery pack at peak capacity without manual intervention.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155565592774,"sku":"081-0200-CC","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-powerplus-48v-dc-plug-accessory-cable-club-car-ds-precedent-081-0200-cc-52890763395441.png?v=1788837162"},{"product_id":"081-0190-bt","title":"Battery Tender® Quick Disconnect Cable Mount","description":"\u003cp\u003eThe Battery Tender® Quick Disconnect Cable Mount solves one of the most common battery maintenance challenges — accessing the battery connection point on vehicles with enclosed compartments, fairings, or hard-to-reach battery locations. Mount this corrosion-resistant housing to the outside of any enclosure, route the cable inside to the battery terminal, and the SAE quick disconnect connector is permanently accessible on the exterior surface. No more removing seats, panels, or fairings to connect a charger.\u003c\/p\u003e\u003ch3\u003eHow It Works\u003c\/h3\u003e\u003cp\u003eThe Cable Mount installs permanently to an enclosure wall using the included hardware. The ring terminal end routes through the enclosure to the battery terminals. The SAE quick disconnect connector sits on the outside of the enclosure — flush-mounted, protected, and accessible. Connect any Battery Tender® charger to the exterior quick disconnect in seconds, charge through the cable, and disconnect cleanly when done. The protective cap covers the connector when not in use.\u003c\/p\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMotorcycles and sport bikes with underseat battery compartments requiring fairing removal for battery access\u003c\/li\u003e\n\u003cli\u003eATVs and UTVs with enclosed battery bays\u003c\/li\u003e\n\u003cli\u003ePersonal watercraft with restricted battery access\u003c\/li\u003e\n\u003cli\u003eSnowmobiles and off-road vehicles with sealed storage compartments\u003c\/li\u003e\n\u003cli\u003eAny vehicle where battery terminal access requires disassembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Chargers and Accessories\u003c\/h3\u003e\u003cp\u003eAll Battery Tender® chargers with SAE quick disconnect output — Junior family, Plus family, Junior Multi-Chemistry, Weather Resistant, WaveCharge Standard line, and any SAE J563-compatible charger or accessory. Works with all Battery Tender® SAE quick disconnect extension cables.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155565658310,"sku":"081-0190-BT","price":12.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-quick-disconnect-cable-mount-081-0190-bt-31068965994594.png?v=1788837163"},{"product_id":"lcd-voltage-indicator-quick-disconnect-usb-and-usb-c-charger-adapter","title":"Battery Tender® Quick Disconnect USB and USB-C Voltage Indicator","description":"\u003cp\u003eThe Battery Tender® Quick Disconnect USB and USB-C Voltage Indicator combines two functions in one SAE quick disconnect accessory — a real-time LCD battery voltage display and simultaneous USB and USB-C device charging at up to 3 Amps from the vehicle's 12V battery. Monitor battery state while charging devices, from the same SAE connection point.\u003c\/p\u003e\u003ch3\u003eLCD Voltage Display — Real-Time Battery Monitoring\u003c\/h3\u003e\u003cp\u003eThe LCD display shows battery voltage in real time — not just a color indicator, but an actual voltage reading. Track battery state precisely during charging sessions, monitor voltage drop under load, and verify that a Battery Tender® charger is maintaining the correct float voltage. More information than LED indicators alone.\u003c\/p\u003e\u003ch3\u003eUSB and USB-C Charging — Up to 3 Amps\u003c\/h3\u003e\u003cp\u003eA USB-A port and a USB-C port provide up to 3 Amps total charging output for phones, tablets, GPS units, and accessories — powered directly from the vehicle's 12V battery through the SAE quick disconnect connection. Charge devices from any vehicle with a Battery Tender® ring terminal harness installed without using the vehicle's ignition-switched outlets.\u003c\/p\u003e\u003ch3\u003eSAE Quick Disconnect — Compatible with the Full Battery Tender® System\u003c\/h3\u003e\u003cp\u003eUses the SAE J563 two-pin connector standard, compatible with all Battery Tender® chargers and accessories. Connect to any existing ring terminal harness or SAE quick disconnect system — the voltage indicator sits inline with the connection, monitoring battery state while the USB and USB-C ports charge devices simultaneously.\u003c\/p\u003e\u003ch3\u003eCompatible With\u003c\/h3\u003e\u003cp\u003eAll Battery Tender® SAE quick disconnect chargers and accessories — Junior family, Plus family, Weather Resistant, Junior Multi-Chemistry, WaveCharge Standard line, and any SAE J563-compatible equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155565723846,"sku":"081-0159","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-lcd-voltage-indicator-quick-disconnect-usb-and-usb-c-charger-adapter-081-0159-31068849602658.png?v=1788837165"},{"product_id":"ev-pedestal-stand","title":"Battery Tender® EV Pedestal Stand","description":"\u003cp\u003eThe Battery Tender® EV Pedestal Stand is a freestanding mounting solution for eCharge Level 2 charging units — providing a clean, professional installation option for garages, driveways, parking areas, and commercial charging locations where wall mounting is not practical or available.\u003c\/p\u003e\u003ch3\u003ePurpose-Built for eCharge Units\u003c\/h3\u003e\u003cp\u003eDesigned specifically for the Battery Tender® eCharge line, the Pedestal Stand positions the charger at the correct height for comfortable cable access and connector management. No wall penetration required — anchor the base to the surface, mount the charger, and connect.\u003c\/p\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGarages and workshops without suitable wall mounting locations\u003c\/li\u003e\n\u003cli\u003eDetached parking structures and carports\u003c\/li\u003e\n\u003cli\u003eDriveway and outdoor residential charging stations\u003c\/li\u003e\n\u003cli\u003eCommercial parking lots and fleet charging areas\u003c\/li\u003e\n\u003cli\u003eMulti-unit residential properties requiring freestanding charging infrastructure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eThe base is designed for concrete or hard surface anchoring. Anchor bolts secure the pedestal to the surface for stability. The eCharge unit mounts directly to the pedestal column without additional hardware or modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLimited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155565789382,"sku":"400-4048","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-mounted-ev-pedestal-stand-400-4048-31018546266210.jpg?v=1788837166"},{"product_id":"limited-edition-2024-battery-tender-branded-bobblehead","title":"Limited Edition 2024 Battery Tender Bobblehead","description":"\u003cp\u003e\u003cspan\u003eMeet Bobby, the latest addition to the Battery Tender family!  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWith the head our Battery Tender® Plus and alligator clip hands, we're excited to offer the second edition of our popular bobblehead to our biggest fans. It makes a great gift for a loved one's garage or office decoration.\u003c\/span\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155565854918,"sku":"Bobble Head","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-limited-edition-2024-battery-tender-bobblehead-bobble-head-31018535747682.png?v=1788837168"},{"product_id":"walmart-2-amp-battery-charger","title":"Battery Tender® Plus 6V\/12V 2 Amp Battery Charger and Maintainer","description":"\u003cp\u003eOne charger. Two voltages. IP65 weather resistance. 2 Amp output. The Battery Tender® Plus 6V\/12V 2 Amp is the most capable dual-voltage maintainer in the Battery Tender® Plus lineup — combining the voltage flexibility of a 6V\/12V selector with weatherproofing for permanent outdoor installation, faster 2 Amp charging, and a 7-Year Limited Warranty that backs it all.\u003c\/p\u003e\u003ch3\u003eDual Voltage. Full Output at Both.\u003c\/h3\u003e\u003cp\u003eThe manual 6V\/12V selector delivers full 2 Amp output at either voltage — not split, not reduced. Select 6V for vintage motorcycles, classic automobiles, and pre-1960s machinery; select 12V for modern vehicles, powersports, marine, and automotive applications. ISM (Infinite Sequential Monitoring™) runs its full 4-stage charging algorithm at the selected voltage, handling lead-acid batteries from 14Ah to 80Ah at both 6V and 12V.\u003c\/p\u003e\u003ch3\u003e2 Amp Output — Faster Recovery, Same ISM Precision\u003c\/h3\u003e\u003cp\u003eThe 2 Amp output charges automotive and powersports batteries roughly 60% faster than a 1.25 Amp charger during the bulk charge phase — without sacrificing the precision of ISM. Larger automotive batteries recover more efficiently, while ISM's absorption phase still tapers current automatically as the battery approaches full charge to prevent overcharging at any output level.\u003c\/p\u003e\u003ch3\u003eISM: 4-Stage Charging at Either Voltage\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization\u003c\/strong\u003e — Battery health check and polarity confirmation before current flows\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Charge\u003c\/strong\u003e — Full 2 Amp output at the selected voltage restores depleted capacity efficiently\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorption\u003c\/strong\u003e — Current tapers automatically as the battery approaches full charge, preventing heat buildup and overcharge damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Maintenance\u003c\/strong\u003e — Precisely regulated micro-current maintains peak voltage at 6V or 12V indefinitely, 24\/7, without overcharging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatible battery size range: 14Ah to 80Ah. All lead-acid chemistries at either voltage: flooded, AGM, gel cell, and sealed maintenance-free.\u003c\/p\u003e\u003ch3\u003eIP65 Weather Resistance — Permanent Installation Ready\u003c\/h3\u003e\u003cp\u003eIP65 certification provides complete dust protection and resistance to water jets from any direction. The Battery Tender® Plus 6V\/12V 2 Amp withstands rain, spray, condensation, and outdoor humidity, making it suitable for permanent mounting in engine bays, outdoor storage structures, and locations where indoor-only chargers cannot be used. The included ring terminal harness stays permanently connected to the battery for fast, no-clamp connections every session.\u003c\/p\u003e\u003ch3\u003e6V Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVintage and pre-1960s motorcycles\u003c\/li\u003e\n\u003cli\u003eClassic and antique automobiles\u003c\/li\u003e\n\u003cli\u003eAntique tractors and farm equipment\u003c\/li\u003e\n\u003cli\u003ePre-war and transitional-era military vehicles\u003c\/li\u003e\n\u003cli\u003eVintage scooters and mopeds\u003c\/li\u003e\n\u003cli\u003eClassic outboard motors with 6V systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e12V Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCars, trucks, and SUVs\u003c\/li\u003e\n\u003cli\u003eMotorcycles and touring bikes\u003c\/li\u003e\n\u003cli\u003eATVs, UTVs, and side-by-sides\u003c\/li\u003e\n\u003cli\u003eBoats and personal watercraft\u003c\/li\u003e\n\u003cli\u003eSnowmobiles and lawnmowers\u003c\/li\u003e\n\u003cli\u003eClassic and collector vehicles\u003c\/li\u003e\n\u003cli\u003eRVs and campers\u003c\/li\u003e\n\u003cli\u003eAny 12V lead-acid, AGM, or GEL battery from 14Ah to 80Ah\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAutomatic Temperature Compensation\u003c\/h3\u003e\u003cp\u003eAt both voltage settings, charge voltage adjusts automatically based on ambient temperature — increasing in cold to ensure a complete charge, reducing in heat to prevent overcharging and gassing. Designed to perform correctly across extreme temperature ranges year-round whether mounted indoors or outdoors, without manual adjustment.\u003c\/p\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpark-proof connection\u003c\/strong\u003e — No current flows until polarity and connection are confirmed correct, protecting vehicle electronics and ECUs at either voltage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverse polarity protection\u003c\/strong\u003e — Automatic shutdown if connections are reversed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort-circuit protection\u003c\/strong\u003e — Automatic fault detection and shutdown\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eETL and CETL certified\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThe Most Capable Dual-Voltage Plus\u003c\/h3\u003e\u003cp\u003eThe Battery Tender® Plus 6V\/12V 2 Amp combines everything in one unit: the voltage flexibility of the 6V\/12V selector, the speed of 2 Amp output, the durability of IP65 weather resistance, and the permanence of a ring terminal harness installation. Sulfation — the permanent, irreversible hardening of lead sulfate on battery plates from sitting discharged — is the primary cause of premature battery failure at both voltages. The Battery Tender® Plus 6V\/12V 2 Amp prevents it entirely through continuous float maintenance, extending battery life from 2–3 years to 5 years or more across every vehicle in the fleet, vintage or modern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e7-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155565985990,"sku":"022-0200-DL-WH","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/2AMP_022-0200-DL-WH_2_b6b932a5-d670-4886-83fe-bd0fc78061bc.png?v=1788837169"},{"product_id":"walmart-4-amp-battery-charger","title":"Battery Tender® 6V\/12V, 4 AMP Selectable Battery Charger - Available at Walmart","description":"\u003cp\u003eThe fully automatic Battery Tender® 4 AMP is a top-of-the-line 12V or 6V switchable battery charger, perfect for automotive, motorcycle and marine repair and maintenance shops. With 3x the power of the Battery Tender® plus this charger is versatile and powerful. Equipped with a simplified 4-Step Automatic charge process. All Battery Tender® chargers automatically switch from full charge to float charge mode. Reverse hook-up protection makes connecting your charger safe and easy to do. LED light indicators make selecting your charge mode simple. \u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155566084294,"sku":"022-0209-WAL","price":104.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-battery-tender-6v-12v-4-amp-lead-acid-lithium-selectable-battery-charger-available-at-walmart-022-0209-wal-59396427645297.png?v=1788837170"},{"product_id":"quick-disconnect-usb-c-charger-adapter","title":"Battery Tender® Quick Disconnect USB-C Charger Adapter","description":"\u003cp\u003eThe Battery Tender® Quick Disconnect USB-C Charger Adapter turns any SAE quick disconnect connection point into a USB-C charging port — delivering up to 3 Amps of USB-C charging output from the vehicle's 12V battery through the same SAE connection used for Battery Tender® chargers. Charge USB-C phones, tablets, laptops, and accessories directly from the vehicle battery without an ignition-switched outlet.\u003c\/p\u003e\u003ch3\u003eSAE Quick Disconnect — Plugs Into Any Battery Tender® System\u003c\/h3\u003e\u003cp\u003eThe SAE J563 quick disconnect connector plugs directly into any Battery Tender® ring terminal harness or SAE quick disconnect accessory already installed on the vehicle. No additional wiring or installation required — connect the USB-C Adapter to the existing SAE connection point and USB-C charging is immediately available.\u003c\/p\u003e\u003ch3\u003eUSB-C Output — Up to 3 Amps\u003c\/h3\u003e\u003cp\u003eDelivers up to 3 Amps of USB-C charging output for modern smartphones, tablets, and USB-C powered accessories. Powered directly by the vehicle's 12V battery through the SAE connection. For simultaneous USB-A and USB-C charging from the same connection, see the Battery Tender® Quick Disconnect USB and USB-C Voltage Indicator (081-0159).\u003c\/p\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMotorcycles and powersports vehicles with Battery Tender® ring terminal harnesses installed\u003c\/li\u003e\n\u003cli\u003eBoats and personal watercraft with SAE quick disconnect access points\u003c\/li\u003e\n\u003cli\u003eAny vehicle with a Battery Tender® SAE connection point requiring USB-C device charging capability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible With\u003c\/h3\u003e\u003cp\u003eAll Battery Tender® SAE quick disconnect chargers and accessories — Junior family, Plus family, Weather Resistant, Junior Multi-Chemistry, WaveCharge Standard line, and any SAE J563-compatible equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155566149830,"sku":"081-0158-C","price":17.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-quick-disconnect-usb-c-charger-adapter-081-0158-c-31068684812386.png?v=1788837172"},{"product_id":"40-amp-onboard-charger","title":"WaveCharge Pro 4-Bank 12V 40 Amp Battery Charger and Maintainer","description":"\u003cp\u003eThe most capable charger in the WaveCharge family. The Battery Tender® WaveCharge Pro 4-Bank delivers 10 Amps per bank across four completely independent charging circuits — 40 Amps total on-board charging capacity — with UL marine ignition protection, full Multi-Chemistry support for lead-acid and Lithium, and ISM (Infinite Sequential Monitoring™) managing each bank's complete 4-stage charge cycle independently and simultaneously.\u003c\/p\u003e\u003ch3\u003eFour Banks. 10 Amps Each. 40 Amps Total.\u003c\/h3\u003e\u003cp\u003eEach of the four banks is a complete independent 10 Amp charging circuit running its own ISM algorithm at its own charge stage with its own chemistry setting. No output sharing. No inter-bank interference. Bank 1 can be recovering a deeply depleted Lithium house bank at full 10 Amps bulk charge while Banks 2, 3, and 4 are simultaneously in float maintenance on fully charged lead-acid service batteries — four different charge stages, four different batteries, one unit.\u003c\/p\u003e\u003ch3\u003eUL Marine Ignition Protection\u003c\/h3\u003e\u003cp\u003eCertified to not produce ignition-capable sparks during operation or connection in the presence of fuel vapors — the certification required for charging devices in enclosed marine spaces near fuel systems. The WaveCharge Pro 4-Bank is rated for installation in engine rooms, fuel-adjacent compartments, and any enclosed marine location where ignition-protected equipment is mandatory.\u003c\/p\u003e\u003ch3\u003eMulti-Chemistry: Lead-Acid and Lithium Per Bank\u003c\/h3\u003e\u003cp\u003eEach of the four banks has its own chemistry selector. A boat running any combination of lead-acid and Lithium banks across four circuits configures each bank independently — the correct ISM profile at full 10 Amps output for each chemistry on each bank, all running simultaneously.\u003c\/p\u003e\u003ch3\u003eISM: 4-Stage Charging on All Four Banks at 10 Amps\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization\u003c\/strong\u003e — Individual battery health check before current flows on each bank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Charge\u003c\/strong\u003e — Full 10 Amps output per bank restores depleted capacity rapidly at the correct chemistry setting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorption\u003c\/strong\u003e — Current tapers per bank as each battery approaches full charge, preventing overcharge for lead-acid and Lithium alike\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Maintenance\u003c\/strong\u003e — Correct protocol for the selected chemistry on each bank, 24\/7, indefinitely\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatible per bank: 20Ah to 200Ah at 12V. Lead-acid: flooded, AGM, gel cell, sealed MF. Lithium: LiFePO4.\u003c\/p\u003e\u003ch3\u003eOne Unit. Complete Coverage.\u003c\/h3\u003e\u003cp\u003eFour individual 10 Amp chargers maintain four batteries with equivalent per-battery results — but require four separate units, four installation locations, and four power connections. The WaveCharge Pro 4-Bank delivers the same independent per-bank ISM performance from a single on-board installation, a single AC connection, and four dedicated output circuits.\u003c\/p\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLarge offshore and bluewater cruising boats with four-bank electrical systems\u003c\/li\u003e\n\u003cli\u003eCommercial and charter boats requiring rapid multi-bank recovery between trips\u003c\/li\u003e\n\u003cli\u003eBoats with dedicated starting, house, bow thruster, and trolling or anchor winch batteries\u003c\/li\u003e\n\u003cli\u003eLiveaboard boats with high-capacity mixed lead-acid and Lithium battery systems\u003c\/li\u003e\n\u003cli\u003eAny four-bank 12V marine application requiring UL marine ignition protection and maximum output\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAutomatic Temperature Compensation\u003c\/h3\u003e\u003cp\u003eAll four banks adjust charge voltage automatically based on ambient temperature for lead-acid applications — ensuring correct charging across all four banks in any operating or storage environment.\u003c\/p\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUL marine ignition protection\u003c\/strong\u003e — certified for enclosed marine spaces and fuel vapor environments\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpark-proof connection on each bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverse polarity protection per bank\u003c\/strong\u003e — incorrect connection on one bank does not affect the remaining three\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection per bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIP67+ sealed housing\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e2-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155566215366,"sku":"022-1009-DL-WH","price":439.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/022-1009_w_Clips_1.png?v=1788837174"},{"product_id":"30-amp-onboard-charger","title":"WaveCharge Pro 3-Bank 12V 30 Amp Battery Charger and Maintainer","description":"\u003cp\u003eThree banks. 10 Amps each. 30 Amps total. The Battery Tender® WaveCharge Pro 3-Bank delivers high-output independent charging to three separate marine battery banks simultaneously — with UL marine ignition protection for engine room installation, full Multi-Chemistry support for lead-acid and Lithium, and ISM (Infinite Sequential Monitoring™) managing each bank's full 4-stage charge cycle independently.\u003c\/p\u003e\u003ch3\u003e10 Amps Per Bank on Three Independent Circuits\u003c\/h3\u003e\u003cp\u003eEach of the three banks operates as a complete independent 10 Amp charging circuit. No output is shared between banks. A bank recovering a depleted trolling motor battery at full 10 Amps bulk charge does not reduce the output available to the two banks in float maintenance on fully charged starting and house batteries. Three batteries charged simultaneously at full output, each at its own charge stage.\u003c\/p\u003e\u003ch3\u003eUL Marine Ignition Protection\u003c\/h3\u003e\u003cp\u003eCertified to not produce ignition-capable sparks during normal operation or connection in the presence of fuel vapors. The WaveCharge Pro 3-Bank meets the independent certification requirement for charging devices installed in enclosed marine spaces near fuel systems — engine rooms, fuel-adjacent bilge compartments, and any location where ignition-protected equipment is mandatory.\u003c\/p\u003e\u003ch3\u003eMulti-Chemistry: Lead-Acid and Lithium Per Bank\u003c\/h3\u003e\u003cp\u003eEach bank has its own chemistry selector. A boat running a lead-acid starting battery, a Lithium house bank, and a lead-acid trolling motor battery configures each bank independently — the correct ISM absorption voltage and float protocol for each chemistry at full 10 Amps output.\u003c\/p\u003e\u003ch3\u003eISM: 4-Stage Charging on All Three Banks at 10 Amps\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization\u003c\/strong\u003e — Individual health check on each bank before current flows\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Charge\u003c\/strong\u003e — Full 10 Amps output per bank restores depleted capacity rapidly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorption\u003c\/strong\u003e — Current tapers per bank independently as each battery approaches full charge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Maintenance\u003c\/strong\u003e — Correct protocol for lead-acid or Lithium on each bank, 24\/7, indefinitely\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatible per bank: 20Ah to 200Ah at 12V. Lead-acid: flooded, AGM, gel cell, sealed MF. Lithium: LiFePO4.\u003c\/p\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCruising and offshore boats with three-bank systems requiring fast recovery\u003c\/li\u003e\n\u003cli\u003eBoats with separate high-capacity starting, house, and auxiliary battery banks\u003c\/li\u003e\n\u003cli\u003eCommercial and charter boats requiring rapid overnight battery recovery\u003c\/li\u003e\n\u003cli\u003eLiveaboard boats with large Lithium house banks alongside lead-acid service batteries\u003c\/li\u003e\n\u003cli\u003eAny three-bank marine application requiring UL marine ignition protection and high output\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAutomatic Temperature Compensation\u003c\/h3\u003e\u003cp\u003eAll three banks adjust charge voltage automatically based on ambient temperature for lead-acid applications — correct charging across all three banks in any marina or offshore environment.\u003c\/p\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUL marine ignition protection\u003c\/strong\u003e — certified for enclosed marine and fuel vapor environments\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpark-proof connection on each bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReverse polarity protection per bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection per bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIP67+ sealed housing\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e2-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155566411974,"sku":"022-1008-DL-WH","price":409.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/022-1008-DL-WH.BatteryTender.01.png?v=1788837175"},{"product_id":"20-amp-onboard-charger","title":"WaveCharge Pro 2-Bank 12V 20 Amp Battery Charger and Maintainer","description":"\u003cp\u003eThe WaveCharge Pro line exists for boats where 3 Amps per bank is not enough. The Battery Tender® WaveCharge Pro 2-Bank delivers 10 Amps per bank — more than three times the output of the WaveCharge line — with UL marine ignition protection, the highest waterproof rating in the WaveCharge family, and the same independent per-bank ISM (Infinite Sequential Monitoring™) architecture that makes WaveCharge the standard for marine multi-bank charging.\u003c\/p\u003e\u003ch3\u003e10 Amps Per Bank — For Larger Batteries and Faster Recovery\u003c\/h3\u003e\u003cp\u003eAt 10 Amps per bank, the WaveCharge Pro 2-Bank recovers large marine house batteries significantly faster. A depleted 150Ah house battery that takes over 50 hours to recover at 3 Amps recovers in approximately 15 hours at 10 Amps — with ISM managing the taper from bulk charge to absorption to float maintenance automatically. For boats with large AGM or Lithium house battery banks, or for commercial boats that need batteries ready on a schedule, Pro output is the practical threshold.\u003c\/p\u003e\u003ch3\u003eUL Marine Ignition Protection\u003c\/h3\u003e\u003cp\u003eCertified to not produce ignition-capable sparks during normal operation or connection in the presence of fuel vapors — the independent certification required for charging equipment installed in enclosed marine spaces near fuel systems. The WaveCharge Pro 2-Bank is certified for installation in engine rooms, fuel-adjacent compartments, and any enclosed marine space where ignition-protected equipment is required.\u003c\/p\u003e\u003ch3\u003eIndependent Banks at Full 10 Amps Output\u003c\/h3\u003e\u003cp\u003eEach bank operates as a complete independent 10 Amp charging circuit. Bank 1 can be in bulk charge recovering a depleted house battery at full 10 Amps while Bank 2 is in float maintenance on a fully charged starting battery — simultaneously, with no output reduction on either bank.\u003c\/p\u003e\u003ch3\u003eMulti-Chemistry: Lead-Acid and Lithium Per Bank\u003c\/h3\u003e\u003cp\u003eEach bank has its own chemistry selector for lead-acid or Lithium (LiFePO4) batteries, delivering the correct ISM charging profile at full 10 Amps output. Boats transitioning house banks from lead-acid to Lithium can configure each bank independently during the transition.\u003c\/p\u003e\u003ch3\u003eISM: 4-Stage Charging on Each Bank at 10 Amps\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization\u003c\/strong\u003e — Individual battery health check before current flows on each bank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Charge\u003c\/strong\u003e — Full 10 Amps output per bank restores depleted capacity rapidly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorption\u003c\/strong\u003e — Current tapers per bank as each battery approaches full charge, preventing overcharge damage for lead-acid and Lithium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Maintenance\u003c\/strong\u003e — Correct protocol for the selected chemistry on each bank, 24\/7, indefinitely\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatible per bank: 20Ah to 200Ah at 12V. Lead-acid: flooded, AGM, gel cell, sealed MF. Lithium: LiFePO4.\u003c\/p\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBoats with large starting and house battery banks requiring faster recovery\u003c\/li\u003e\n\u003cli\u003ePowerboats and sailboats with high-capacity AGM or Lithium house batteries\u003c\/li\u003e\n\u003cli\u003eCommercial and charter boats requiring rapid battery turnaround\u003c\/li\u003e\n\u003cli\u003eBoats requiring UL marine ignition protection in engine room installation\u003c\/li\u003e\n\u003cli\u003eAny two-bank 12V marine application where 3 Amps per bank is insufficient\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAutomatic Temperature Compensation\u003c\/h3\u003e\u003cp\u003eBoth banks adjust charge voltage automatically based on ambient temperature for lead-acid applications — ensuring complete charging in cold conditions and preventing overcharge in heat.\u003c\/p\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUL marine ignition protection\u003c\/strong\u003e — certified for enclosed marine spaces and fuel vapor environments\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpark-proof connection on each bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReverse polarity protection per bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection per bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIP67+ sealed housing\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e2-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155566477510,"sku":"022-1007-DL-WH","price":254.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-wavecharge-pro-2-bank-12v-20-amp-battery-charger-022-1007-dl-wh-59391660622193.png?v=1788837177"},{"product_id":"ev-charger-32-amp","title":"eCharge 32 Amp Level 1+2 EV Charger","description":"\u003cp\u003eOne charger. Two voltage levels. The Battery Tender® eCharge 32 Amp Level 1+2 is the most flexible EV charger in the eCharge lineup — operating at 120V Level 1 from any standard outlet or switching to 240V Level 2 for full-speed charging at home. Energy Star certified for maximum charging efficiency, the eCharge 32 Amp Level 1+2 is the right choice for drivers who need Level 2 speed at home but want the flexibility of Level 1 when 240V is not available.\u003c\/p\u003e\u003ch3\u003eLevel 1 and Level 2: The Key Difference\u003c\/h3\u003e\u003cp\u003eLevel 1 charging runs on 120V household current and delivers approximately 1.9 kW — practical for overnight PHEV charging or daily EV range top-ups for low-mileage drivers. Level 2 charging runs on 240V and at 32 Amps delivers approximately 7.7 kW — adding roughly 20–25 miles of driving range per hour. A depleted mid-range EV battery that takes 40+ hours to recover at Level 1 recovers fully in 8–10 hours at Level 2. For most EV drivers with meaningful daily mileage, Level 2 is the practical standard for home charging.\u003c\/p\u003e\u003ch3\u003eWhy Dual-Voltage Flexibility Matters\u003c\/h3\u003e\u003cp\u003eA dedicated hardwired Level 2 charger operates at 240V only and cannot be used anywhere that 240V is unavailable. The eCharge 32 Amp Level 1+2 operates at Level 1 wherever a standard outlet is available — travel, secondary properties, temporary situations, or any location where 240V has not been installed — and delivers full Level 2 speed where 240V is accessible. For drivers who charge at more than one location, dual-voltage capability eliminates the need for separate Level 1 and Level 2 equipment.\u003c\/p\u003e\u003ch3\u003eCharging Speed at Each Level\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevel 1 (120V):\u003c\/strong\u003e ~1.9 kW · ~3–5 miles of range added per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevel 2 (240V, 32 Amp):\u003c\/strong\u003e ~7.7 kW · ~20–25 miles of range added per hour\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eActual range added per hour varies by vehicle onboard charger capacity and battery efficiency. Vehicle onboard charger capacity is the limiting factor — a vehicle with a 7.2 kW onboard charger will charge at a maximum of 7.2 kW regardless of the station's output rating.\u003c\/p\u003e\u003ch3\u003eJ1772 Standard Connector\u003c\/h3\u003e\u003cp\u003eThe J1772 connector is the North American standard for Level 1 and Level 2 EV charging, compatible with all non-Tesla electric vehicles and plug-in hybrids sold in North America. No adapter is required for J1772-compatible vehicles across all major domestic and international manufacturers.\u003c\/p\u003e\u003ch3\u003eEnergy Star Certified\u003c\/h3\u003e\u003cp\u003eThe eCharge 32 Amp Level 1+2 is Energy Star certified — meeting EPA energy efficiency guidelines for EV charging equipment at both voltage levels. Energy Star certification ensures minimized standby consumption and optimized charging efficiency, reducing total operating cost across the full life of the unit.\u003c\/p\u003e\u003ch3\u003eElectrical Requirements for Level 2\u003c\/h3\u003e\u003cp\u003eLevel 2 operation requires a dedicated 240V, 40 Amp circuit minimum. For new circuit installations, professional installation by a licensed electrician is recommended. The Level 1 mode operates from any standard 120V, 15–20 Amp outlet with no electrical modifications required.\u003c\/p\u003e\u003ch3\u003eCompatible Vehicles\u003c\/h3\u003e\u003cp\u003eCompatible with all J1772 non-Tesla battery electric vehicles and plug-in hybrids sold in North America — all major domestic and international manufacturers.\u003c\/p\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eGFCI ground fault circuit interrupter protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOvercurrent protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTemperature monitoring and thermal management\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeatherproof rated for indoor and outdoor installation\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUL Listed\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnergy Star certified\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eLimited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155566543046,"sku":"022-3017-DL-WH","price":454.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-echarge-32-amp-level-1-2-portable-electric-vehicle-charger-022-3017-dl-wh-30740956184674.jpg?v=1788837179"},{"product_id":"ev-charger-16-amp","title":"eCharge 16 Amp Level 1 EV Charger","description":"\u003cp\u003eThe Battery Tender® eCharge 16 Amp Level 1 is the most accessible entry point into home EV charging — plug it into any standard 120V outlet and start charging. No electrician, no dedicated circuit installation, no new hardware required. For plug-in hybrid owners and EV drivers with modest daily mileage, Level 1 charging through a standard household outlet delivers enough overnight range recovery for most daily driving patterns — with Energy Star certified efficiency that keeps operating costs as low as possible.\u003c\/p\u003e\u003ch3\u003eWhat Level 1 Charging Is\u003c\/h3\u003e\u003cp\u003eLevel 1 charging uses standard 120V household current — the same outlet that powers household appliances. At 16 Amps on a 120V circuit, the eCharge 16 Amp delivers approximately 1.9 kilowatts of charging power, adding roughly 3–5 miles of driving range per hour. An 8–10 hour overnight connection adds 30–50 miles of range — sufficient for the majority of daily commutes and typical plug-in hybrid usage.\u003c\/p\u003e\u003ch3\u003eWho Level 1 Is Right For\u003c\/h3\u003e\u003cp\u003eLevel 1 is the correct choice when overnight charging is sufficient for daily driving needs and when the cost or complexity of Level 2 installation is not justified. Specific use cases where Level 1 is the practical answer:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePlug-in hybrid owners whose smaller battery packs fully recharge overnight at Level 1 speeds\u003c\/li\u003e\n\u003cli\u003eEV drivers who travel under 40–50 miles daily and can plug in each evening\u003c\/li\u003e\n\u003cli\u003eRenters and apartment residents with access to a standard outlet but without the ability to install Level 2 equipment\u003c\/li\u003e\n\u003cli\u003eTravel charging at hotels, campgrounds, and remote locations where standard outlets are the only option available\u003c\/li\u003e\n\u003cli\u003eSecond homes and vacation properties where infrequent EV use does not justify Level 2 installation\u003c\/li\u003e\n\u003cli\u003eHouseholds with a second EV that charges primarily overnight and does not require fast turnaround\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eJ1772 — The North American EV Standard\u003c\/h3\u003e\u003cp\u003eThe eCharge 16 Amp Level 1 uses the J1772 connector — the North American standard for Level 1 and Level 2 EV charging. J1772 is compatible with all non-Tesla electric vehicles and plug-in hybrids sold in North America, including battery electric vehicles and PHEVs from all major domestic and international manufacturers. No adapter is required for J1772-compatible vehicles.\u003c\/p\u003e\u003ch3\u003eWeatherproof for Flexible Installation\u003c\/h3\u003e\u003cp\u003eWeatherproof construction allows permanent installation in garages, carports, and covered outdoor locations. The cable and connector management system keeps the J1772 handle organized and protected when not in use, extending cable life and maintaining a clean installation.\u003c\/p\u003e\u003ch3\u003eEnergy Star Certified\u003c\/h3\u003e\u003cp\u003eThe eCharge 16 Amp Level 1 is Energy Star certified — meeting strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. Energy Star certification ensures minimal standby power consumption and optimized charging efficiency, reducing the total cost of EV ownership over time.\u003c\/p\u003e\u003ch3\u003eCharging Cost Advantage\u003c\/h3\u003e\u003cp\u003eLevel 1 charging during off-peak evening and overnight hours — when electricity rates are lowest in most utility markets — maximizes the cost-per-mile advantage of EV ownership. For drivers whose daily routine allows overnight Level 1 charging, the combination of low installation cost and off-peak charging rates produces the lowest possible cost-per-mile of any home charging option.\u003c\/p\u003e\u003ch3\u003eCompatible Vehicles\u003c\/h3\u003e\u003cp\u003eThe J1772 connector is the standard charge port for all non-Tesla battery electric vehicles and plug-in hybrids sold in North America, including electric cars, electric SUVs, electric trucks, and all plug-in hybrid configurations across all major manufacturers.\u003c\/p\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eGFCI ground fault circuit interrupter protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOvercurrent protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTemperature monitoring and thermal management\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeatherproof rated for indoor and outdoor installation\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUL Listed\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnergy Star certified\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eLimited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155566608582,"sku":"022-3016-DL-WH","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/022-3016-DL-WH.BatteryTender.03_7540973f-ed13-4b6a-993c-0891b30282f9.jpg?v=1788837180"},{"product_id":"5-bank-4-amp-selectable-12v-6v-battery-charger","title":"Power Tender® 5-Bank 4 Amp 12V\/6V Battery Charger and Maintainer","description":"\u003cp\u003eFive vehicles. Five independent charging circuits. The PowerTender® 5-Bank 4 Amp is the first multi-bank Battery Tender® charger to offer per-bank chemistry selection and per-bank voltage selection — each of its five banks independently configurable for Lithium or lead-acid chemistry and 6V or 12V voltage. For mixed fleets, collector garages, and dealerships maintaining multiple vehicles with different battery types and voltages simultaneously, the 5-Bank is the single infrastructure solution.\u003c\/p\u003e\u003ch3\u003ePer-Bank Chemistry and Voltage Selection — What Makes This Different\u003c\/h3\u003e\u003cp\u003eThe Battery Tender® 2-Bank and 4-Bank maintain 12V lead-acid batteries independently across multiple banks. The PowerTender® 5-Bank goes further: each bank has its own chemistry selector (lead-acid or Lithium) and its own voltage selector (6V or 12V). Bank 1 can be maintaining a 12V Lithium motorcycle battery while Bank 2 charges a 6V classic car battery and Bank 3 runs a 12V lead-acid ATV battery — all simultaneously, all at full 4 Amp output per bank, all running independent ISM cycles.\u003c\/p\u003e\u003ch3\u003eISM on Every Bank, Fully Independent\u003c\/h3\u003e\u003cp\u003eEach bank runs the complete 4-stage ISM algorithm independently at 4 Amp output and the selected voltage and chemistry:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization\u003c\/strong\u003e — Individual battery health check before current flows on that bank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Charge\u003c\/strong\u003e — Full 4 Amp output at the selected voltage restores depleted capacity for that battery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorption\u003c\/strong\u003e — Current tapers independently as that battery approaches full charge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Maintenance\u003c\/strong\u003e — Correct maintenance protocol for lead-acid or Lithium delivered 24\/7, with the correct voltage for each bank\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatible per bank: 14Ah to 100Ah at 6V or 12V. Lead-acid: flooded, AGM, gel cell, and sealed maintenance-free. Lithium: LiFePO4.\u003c\/p\u003e\u003ch3\u003eMixed Fleet Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCollector garages with vintage 6V classics alongside modern 12V lead-acid and Lithium vehicles\u003c\/li\u003e\n\u003cli\u003eDealerships maintaining demo and inventory units with mixed battery chemistries and voltages\u003c\/li\u003e\n\u003cli\u003ePowersports retailers maintaining floor stock with lead-acid and Lithium batteries across voltage classes\u003c\/li\u003e\n\u003cli\u003eService departments with multiple vehicle types in simultaneous storage\u003c\/li\u003e\n\u003cli\u003eHouseholds with five powersports or recreational vehicles in seasonal storage\u003c\/li\u003e\n\u003cli\u003eAny operation where five batteries of different voltage and chemistry need simultaneous independent maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e4 Amp Per Bank — Faster Than the Plus Line\u003c\/h3\u003e\u003cp\u003eAt 4 Amp per bank, the PowerTender® 5-Bank charges and recovers batteries more than three times faster than a 1.25 Amp Plus during bulk charging — while maintaining the same ISM precision and float maintenance capability for both lead-acid and Lithium.\u003c\/p\u003e\u003ch3\u003eAutomatic Temperature Compensation\u003c\/h3\u003e\u003cp\u003eAll banks automatically adjust charge voltage based on ambient temperature for lead-acid applications — delivering the correct voltage in cold storage conditions and reducing output in heat to prevent overcharging. Each bank compensates independently.\u003c\/p\u003e\u003ch3\u003eSafety Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpark-proof connection on each bank\u003c\/strong\u003e — no current flows until polarity and connection are confirmed correct per bank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverse polarity protection per bank\u003c\/strong\u003e — incorrect connection on one bank does not affect others, protecting Lithium BMS systems\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort-circuit protection per bank\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eETL and CETL certified\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eISM float maintenance on all five banks prevents sulfation in lead-acid batteries and delivers the correct Lithium maintenance protocol simultaneously. Battery life consistently extends from 2–3 years to 5 years or more across every battery connected to the 5-Bank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155566674118,"sku":"021-0133-DL-WH","price":579.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/021-0133-DL-WH-1.jpg?v=1788837182"},{"product_id":"800-1500-2000-amp-smart-alligator-clips","title":"Smart Alligator Clips for Jump Starters - 800, 1000, 1500, \u0026 2000 AMP","description":"\u003cp\u003eGenuine replacement smart alligator clips for Battery Tender® lithium jump starters. The intelligent clamp connector delivers safe, spark-free connections and works across the 600–2000 AMP jump starter range.\u003c\/p\u003e\u003cp\u003eCompatible with 030-1000-WH (600 AMP), 030-3010-WH (800 AMP), 030-1011-WH (1000 AMP), 030-2020-WH (1500 AMP), and 030-2030-WH \/ 030-3040-WH (2000 AMP). Backed by Battery Tender® lifetime customer support.\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155566739654,"sku":"081-0069-28","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/battery-tender-default-title-smart-alligator-clips-for-jump-starters-800-1000-1500-2000-amp-081-0069-28-30740973682786.png?v=1788837184"},{"product_id":"battery-tender®-combo-alligator-clips-ring-terminal-accessory-cable","title":"Battery Tender® Alligator Clip and Ring Terminal Combo","description":"\u003cp\u003eThe Battery Tender® Alligator Clip and Ring Terminal Combo is the most versatile charging accessory cable in the lineup — providing both alligator clip and ring terminal connection options in a single SAE quick disconnect cable. Connect directly to any battery terminal with the alligator clips for portable use, or install the ring terminal end permanently for ongoing maintenance charging. One cable handles both scenarios.\u003c\/p\u003e\u003ch3\u003eTwo Connection Methods — One Cable\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlligator clips\u003c\/strong\u003e — Direct connection to any exposed battery terminal for portable, temporary, or one-time charging use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRing terminal\u003c\/strong\u003e — Permanent installation on the battery for ongoing maintenance charging without repeated clamp connections\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSAE Quick Disconnect — Full Battery Tender® Compatibility\u003c\/h3\u003e\u003cp\u003eUses the SAE J563 quick disconnect standard, compatible with all Battery Tender® chargers and accessories. Switch between the alligator clip side and the ring terminal side for different vehicles or different charging scenarios without changing the charger.\u003c\/p\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePortable charging sessions on vehicles without existing ring terminal harnesses\u003c\/li\u003e\n\u003cli\u003ePermanent maintenance charging on vehicles where ring terminal installation is preferred\u003c\/li\u003e\n\u003cli\u003eMixed-use situations — use clips for one vehicle, ring terminal for another\u003c\/li\u003e\n\u003cli\u003eMarine, automotive, powersports, and any 12V battery application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible With\u003c\/h3\u003e\u003cp\u003eAll Battery Tender® chargers and accessories with SAE quick disconnect output — Junior family, Plus family, Junior Multi-Chemistry, Weather Resistant, WaveCharge Standard line, and any SAE J563-compatible equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1-Year Limited Warranty | DeLand, Florida Since 1965\u003c\/strong\u003e\u003c\/p\u003e","brand":"Battery Tender®","offers":[{"title":"Default Title","offer_id":47155566805190,"sku":"081-0180","price":15.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/files\/updated_combo_cable_with_Phillips_head_screw_02.png?v=1788837185"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/9680\/6854\/collections\/images_9aa1d84d-fb63-46ae-bcac-1bffca430acb.jpg?v=1788841876","url":"https:\/\/fullthrottlewrenches.com\/collections\/battery-tender.oembed","provider":"My Store","version":"1.0","type":"link"}